OK i need some help with my swap.
I don't know where to buy or find the motor mount for the sr20
That fits the rx7 so I stuck thinking how to put it together any advice on how I can pull this thing right...

 

On the less common swaps most people are fabricating the mounting themselves or having the shop building their car fab. You may get lucky and find someone who's done it and made a few extra mounts, but to my knowledge I'm not familiar with a ready made solution.

 

welcome to the board.

if you're truly committed to this, then as said above, it looks like you're pretty much looking at having to go fully custom. get the engine and get busy. what i WILL say is i hope you have some kind of experience with cars or you know someone that does - particularly fabrication and wiring. things like this can easily suck huge amounts of money and never end with a running car. even worse, you can end up with a hacked up car and dismantled engine that you bought, but are forced to basically give away. it's a sad truth, but one worth mentioning.

i'm sure i remember coming across one at least one complete car over the years, but i honestly have no clue where it was ... could have been one of the forums or it could have been a magazine.

below i've linked what seems to be a British drifting site that Google resulted as having like 3 threads on the topic. i have not looked at in depth, but figured you could check it out.
Sr20 rx7

 

Just me,but I would be grabbing a coffee and browse through this section:
Other Engine Conversions - non V-8 - RX7Club.com

 

Thanks guys