Stupid question I know.
Stupid question I know.
Joined: Sep 2005
Posts: 25,581
Likes: 136
From: Smiths Falls.(near Ottawa!.Mapquest IT!)
5 speed transmission has a plug on the driver's side of the transmission.it is square headed so you can get a wrench on it.
You take that plug out and fill the transmission until the fluid will ooze out of the Fill hole.This lets you know the trans had enough fluid in it,then you put the plug back in and tighten.
Of course if you check it and fluid oozes out,it has enough in it so don't fill any more!Just put the plug back in..and DONE!
You take that plug out and fill the transmission until the fluid will ooze out of the Fill hole.This lets you know the trans had enough fluid in it,then you put the plug back in and tighten.
Of course if you check it and fluid oozes out,it has enough in it so don't fill any more!Just put the plug back in..and DONE!
Joined: Feb 2001
Posts: 29,798
Likes: 128
From: London, Ontario, Canada
This may help:
http://www.aaroncake.net/rx-7/transfluid.htm
http://www.aaroncake.net/rx-7/transfluid.htm
Thread
Thread Starter
Forum
Replies
Last Post
Adaptronic S5 Turbo PNP Unit questions
_Tones_
Adaptronic Engine Mgmt - AUS
10
May 25, 2021 05:37 AM
msilvia
3rd Generation Specific (1993-2002)
15
Sep 11, 2015 12:13 PM
Nosferatu
2nd Generation Specific (1986-1992)
7
Sep 5, 2015 02:13 PM