New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

Starting Issue.

Thread Tools
 
Search this Thread
 
Old 01-28-10, 07:35 AM
  #1  
Newbie
Thread Starter
 
Klutchy's Avatar
 
Join Date: Jun 2009
Location: Australia
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Starting Issue.

Its a 1984 series 3, 12a


Started it up today for the first time in a while with the help of a mate to just charge up the battery a bit as it didn't have enough power to crank it over.

Went for a quick drive, came back, shut it down. Few minutes later went back out there and turned the key..absolutely nothing, completely dead.

The alarm is loud, headlights are on and very bright, everything seems to have full power and the battery seems nice and charged.

Put jumper leads on, without even starting his car, and it fired up straight away.
Let it idle for a bit, took the leads off and let it idle.

Turned it off, then went to turn it back on and the EXACT same thing happend again...


I'm completely baffled as to whats going on...any help?
Old 01-28-10, 10:47 AM
  #2  
Can Post Only in New Member Section
 
Bill13BTurbo's Avatar
 
Join Date: Jan 2010
Location: Northern VA
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
starting issues

Check the lead from your batery to your started to see if it is not connected very well, or very corroded,
also, check the connection of the starter ignition lead (smaller wire attatched to starter) as it sends the starter the signal to start.

best of luck
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
03-15-22 12:04 PM
ZacMan
Build Threads
4
09-19-15 09:20 PM
sherff
Adaptronic Engine Mgmt - AUS
5
09-12-15 12:22 PM
whinin
New Member RX-7 Technical
10
09-05-15 11:52 PM



Quick Reply: Starting Issue.



All times are GMT -5. The time now is 10:01 PM.