New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

Starting Issue

Thread Tools
 
Search this Thread
 
Old 02-19-17, 11:44 PM
  #1  
Can Post Only in New Member Section
Thread Starter
 
Jnewell48229's Avatar
 
Join Date: Feb 2017
Location: Tacoma Washington
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
WA Starting Issue

I have a 87 gxl, one day it will start no issues whats so ever, the next day itll crank for a while then never fire and eventually flood, I pull the fuses and unflood the car but then it wont even crank and you just hear a clicking noise? Could be my starter?
Old 02-20-17, 12:14 AM
  #2  
1985 rx7 GS
 
Kdo58's Avatar
 
Join Date: Dec 2016
Location: Puyallup
Posts: 92
Received 9 Likes on 9 Posts
Might be a bad battery
Old 02-20-17, 07:28 AM
  #3  
Rotary Enthusiast
iTrader: (5)
 
Red94fd's Avatar
 
Join Date: Dec 2016
Location: Florida
Posts: 809
Received 94 Likes on 75 Posts
Try jump start it, if it still doing it, it's your starter. That clicking noise is your starter engaging, but it will not turn over.
Old 02-20-17, 08:29 AM
  #4  
Urban Combat Vet

iTrader: (16)
 
Sgtblue's Avatar
 
Join Date: Oct 2003
Location: Mid-west
Posts: 12,012
Received 863 Likes on 612 Posts
Crank but not start: Check plugs, coils, timing, compression.
Click but no crank: search in the 2nd Gen. section under terms like 'click' etc. On the FD, there's some voltage drop between the battery and starter from the factory. If the battery is just a little weak that can be a symptom. Not certain about the FC.
Old 02-20-17, 10:59 PM
  #5  
Sharp Claws

iTrader: (30)
 
RotaryEvolution's Avatar
 
Join Date: Oct 2003
Location: Central Florida
Posts: 5,107
Likes: 0
Received 41 Likes on 40 Posts
due to all the cranking you might have worn out the brushes, so the typical voltage issues might not be the problem here.

a compression test might help figure out the flooding issue.




All times are GMT -5. The time now is 01:12 AM.