RX7Club.com - Mazda RX7 Forum

New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

Throttle valve question

Thread Tools
 
Search this Thread
 
Old Feb 21, 2017 | 12:08 PM
Share
  #1  
FC3S_Bat's Avatar
FC3S_Bat
Thread Starter
Full Member
 
Joined: Dec 2016
Posts: 51
Likes: 0
From: Florida
Throttle valve question
Is the bottom valve supposed to be slightly open like that? Just removed to replace injectors and noticed as i was cleaning it. The car rough idles sometimes. Could this be the cause of that? If not ill start checking for vacumm leaks but i figured ill just ask while im at it
Reply
0
Old Feb 21, 2017 | 01:38 PM
Share
  #2  
lduley
roTAR needz fundZ
Tenured Member 15 Years
iTrader: (1)
 
Joined: Aug 2002
Posts: 2,614
Likes: 31
From: Freeland, MI
IIRC the FSM says it should be open 2mm without the cold start actuated. Looks like on yours, your cold start is on
Reply
0
Old Feb 21, 2017 | 04:15 PM
Share
  #3  
FC3S_Bat's Avatar
FC3S_Bat
Thread Starter
Full Member
 
Joined: Dec 2016
Posts: 51
Likes: 0
From: Florida
Originally Posted by lduley
IIRC the FSM says it should be open 2mm without the cold start actuated. Looks like on yours, your cold start is on
It does have approx 2mm within the opening. Theres also a 1mm(ish) hole drilled into it which you cant really notice by the pic. Thank you.
Reply
0
Back to Subforum
New Member RX-7 Technical
View Next Unread
Max wheel and tire size




Advanced Search

All times are GMT -5. The time now is 08:47 PM.