New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

Stall and Go

Thread Tools
 
Search this Thread
 
Old Jun 27, 2014 | 05:59 PM
  #1  
kadz's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Jun 2014
Posts: 70
Likes: 0
From: Durban
Stall and Go

Hi all,

Firstly, thanks to all for this great forum. i have learnt a lot from here.

I have imported a 1992 Mazda Rx7 efini Type R

The mods on the vehicle are the ffg:
Blitz twin air intakes
Blitz Bov
Knight sport ecu and 300km speedo
Racing clutch(not sure which brand but shaped similar to excedy single sport series)
Full down pipe exhaust system
Feed elbow intake

When i received the car:
1.Fuel was leaking from the bottom pipe of the charcoal canister, I place a bolt there and kept the fuel cap loose to avoid pressure building in the tank
2.Whilst driving, if you give it gas, it will stall for a second and then will go.

I am not sure if the fuel is too lean(using 95unlead) or is it because of the fuel leaking from charcoal canister.

Other than that theres no problems with the car. What should I look at to solve the above two problems

Thanking in Advance
Reply
Old Jun 27, 2014 | 08:33 PM
  #2  
misterstyx69's Avatar
Retired Moderator, RIP
Tenured Member: 20 Years
iTrader: (142)
 
Joined: Sep 2005
Posts: 25,581
Likes: 136
From: Smiths Falls.(near Ottawa!.Mapquest IT!)
2 things.
number ONE..fix the Fuel leak problem.

number TWO...FIX THE FUEL LEAK Problem

Sounds like TPS but then again you have a knightsport ECU and who knows what that is set up for.
Reply
Old Jun 29, 2014 | 02:32 PM
  #3  
abdul k's Avatar
Junior Member
 
Joined: Jun 2012
Posts: 10
Likes: 0
From: south africa
After going through the FSM, there is a two way check valve on one of the fuel lines. Most probably that is not working like how it suppose to be
Reply
Old Jun 29, 2014 | 02:35 PM
  #4  
kadz's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Jun 2014
Posts: 70
Likes: 0
From: Durban
Okay will check it out. Do i have to drop the tank or can i access it from where the pump sits ?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
toplessFC3Sman
2nd Generation Specific (1986-1992)
6
Mar 20, 2018 01:54 PM
Einheri
Single Turbo RX-7's
14
Oct 7, 2015 12:23 PM
xXBrendanXx
Power FC Forum
6
Sep 17, 2015 10:10 AM
REX7&Z32TT
New Member RX-7 Technical
5
Sep 9, 2015 05:16 AM
Steven_McKinley
General Rotary Tech Support
12
Sep 5, 2015 10:48 AM




All times are GMT -5. The time now is 08:47 PM.