the sound of detonation
#1
Full Member
Thread Starter
Join Date: Oct 2008
Location: huntsville AL
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
the sound of detonation
i was just curious if someone could comment on how detonation sounds in a rotary. i'm all too familiar with this sound on piston engines but i was curious if you could expect a similar or different sound when this condition occurs in a wankel. any info would be appreciated. thanks.
#5
Full Member
Thread Starter
Join Date: Oct 2008
Location: huntsville AL
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
OK, so it is quite a bit different than the metallic crickets chirping kind of sound you hear in a typical piston engine that has the timing over advanced. i was experiencing a popping sound when i would get on it (WOT) over 4000-5000 RPM, also was like it was missing really jerky power going on. any more info would be great. thanks.
#6
Former Moderator. RIP Icemark.
OK, so it is quite a bit different than the metallic crickets chirping kind of sound you hear in a typical piston engine that has the timing over advanced. i was experiencing a popping sound when i would get on it (WOT) over 4000-5000 RPM, also was like it was missing really jerky power going on. any more info would be great. thanks.
#7
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post