smoking after 700 miles
07-29-09, 12:58 AM
#1
me
Thread Starter
Join Date: May 2008
Location: las vegas
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
smoking after 700 miles
so my question is. is it normal to smoke after 700 miles on the rebuild? it runs grate it just smokes lightly after it warms up and it always starts with a puff of smoke witch is nothing so any ideas will be much appreciated thanks guys.
08-01-09, 09:34 AM
#3
******
iTrader: (7)
Join Date: May 2009
Location: miami
Posts: 901
Likes: 0
Received 0 Likes
on
0 Posts
r u running rich??? might be a oil seal or a bearing damn hopefully not a bearing but let me ask you did you put new bearings on??? do u see any wable on the front of e shaft??
right maybe turbo check the return line
right maybe turbo check the return line
Last edited by Aaron Cake; 08-01-09 at 10:10 AM. Reason: Merge two posts
08-01-09, 10:11 AM
#4
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
A few more details would be nice. Is this a stock setup or are you running a different EMS?
Rebuilds should be smoke free after the initial startup for the most part. However if the engine was built with worn oil o-ring carriers, or the springs were installed wrong, you may end up with smoke.
It could also be something as simple as a PCV malfunction.
Rebuilds should be smoke free after the initial startup for the most part. However if the engine was built with worn oil o-ring carriers, or the springs were installed wrong, you may end up with smoke.
It could also be something as simple as a PCV malfunction.
08-03-09, 10:28 AM
#5
me
Thread Starter
Join Date: May 2008
Location: las vegas
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
stock t2 set up. it runs great its just that it lightly smokes just enough to catch the cops eyes. some people said i might b leaking oil in my turbo, il check it out, PVC? sorry im a newb
Thread
Thread Starter
Forum
Replies
Last Post