Secondary turbo low PSI
#1
Full Member
Thread Starter
Join Date: Dec 2010
Location: Bremerton, WA
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
Secondary turbo low PSI
There might be a thread about this somewhere, but i couldnt quite find it, so sorry for the repost if this is indeed one. I am having a problem with ny secondary turno spooling improperly. The first hits about 10-12 Psi and the at about 5k rpm in 3rd gear it drops to about 0-2 then slowly creeps up to about 3-4 max. I have done a lot of reading and i am guessing that it is my pre-cat because i dont have a downpipe yet. Is this a possible issue? Also, if it is, what is the best downpipe to get that will bolt onto the stock Cat. I cant put a midpipe because of CA emissions. Any input would be great. Thanx guys!
#2
needs more track time
iTrader: (16)
It is indeed possible that you have a clogged pre-cat. I actually have an extra Bonez downpipe from rx7.com that I'll gladly sell you if you are looking for a used downpipe. Otherwise, I'd recommend that same downpipe from rx7.com.
Beyond the potentially clogged pre-cat, you probably want to read the links in the 3rd gen FAQ thread to troubleshoot the issue further.
Link to FAQ: https://www.rx7club.com/3rd-generation-specific-1993-2002-16/faq-3rd-gen-other-useful-links-68640/
Link to the turbo troubleshooting (scroll down to T section):
http://www.autosportracetech.com/RX-...leshooting.htm
Troubleshooting sequentials is time consuming so be patient.
Beyond the potentially clogged pre-cat, you probably want to read the links in the 3rd gen FAQ thread to troubleshoot the issue further.
Link to FAQ: https://www.rx7club.com/3rd-generation-specific-1993-2002-16/faq-3rd-gen-other-useful-links-68640/
Link to the turbo troubleshooting (scroll down to T section):
http://www.autosportracetech.com/RX-...leshooting.htm
Troubleshooting sequentials is time consuming so be patient.
#3
Full Member
Thread Starter
Join Date: Dec 2010
Location: Bremerton, WA
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
How much you want to sell that bonez for? I been looking for one and they are not easy to find in my searches at least, PM me with more details if you dont mind bro. Also, thanx for the help, i tried looking in the FAQ section and i must have just overlooked that, so thanx!
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM