S4 TII on S4 N/A Tranny?
Thread Starter
Spinning Dorito
iTrader: (11)
Joined: Dec 2010
Posts: 405
Likes: 0
From: Boulder, Colorado
S4 TII on S4 N/A Tranny?
I have been searching and have not found a clear answer.
I have a full TII swap; ecu tranny, wiring, etc. except the modified TII to N/a driveshaft.
Just for the time being i want to match the TII block yo the N/A tranny just to see it run
and maybe drive it a little.
The FC currently has it's stock N/A engine.
Will the TII Block bolt on to the N/A transmission and work?
Will I need the S4 N/A Flywheel on the TII Block, or counter weight?
The TII has no injectors, can I use the N/A injectors ( I know you need bigger ones)
just to start the car and the stock fuel pump just to fire it up and go around the block?
I have a full TII swap; ecu tranny, wiring, etc. except the modified TII to N/a driveshaft.
Just for the time being i want to match the TII block yo the N/A tranny just to see it run
and maybe drive it a little. The FC currently has it's stock N/A engine.
Will the TII Block bolt on to the N/A transmission and work?
Will I need the S4 N/A Flywheel on the TII Block, or counter weight?
The TII has no injectors, can I use the N/A injectors ( I know you need bigger ones)
just to start the car and the stock fuel pump just to fire it up and go around the block?
Joined: Sep 2005
Posts: 25,581
Likes: 136
From: Smiths Falls.(near Ottawa!.Mapquest IT!)
swap the TII engine in MINUS it's flywheel.
all the other parts stay N/A.(including Flywheel)
So TII engine,N/A flywheel,trans,clutch.starter etc.
It is Plug and play.
MOD Note: you have sufficient posts to ask your questions in the Main Forum.Please do so as the NEW section is for NEW members.Allow these New Guys to take full advantage of this section and not have their questions held back by Guys that are able to post elsewhere.
They can only post in certain section until they get ample posts.You on the other hand,do not have to wait.
All threads need to be read before posting,to meet criteria.
There is NO waiting in Sec GEN Specific if you have the post count to do so.
Thanks.STYX (MOD)
all the other parts stay N/A.(including Flywheel)
So TII engine,N/A flywheel,trans,clutch.starter etc.
It is Plug and play.
MOD Note: you have sufficient posts to ask your questions in the Main Forum.Please do so as the NEW section is for NEW members.Allow these New Guys to take full advantage of this section and not have their questions held back by Guys that are able to post elsewhere.
They can only post in certain section until they get ample posts.You on the other hand,do not have to wait.
All threads need to be read before posting,to meet criteria.
There is NO waiting in Sec GEN Specific if you have the post count to do so.
Thanks.STYX (MOD)
Last edited by misterstyx69; May 25, 2013 at 05:32 PM.
Thread
Thread Starter
Forum
Replies
Last Post
ricardo.benin
3rd Generation Specific (1993-2002)
3
Sep 23, 2015 10:08 AM
jakeishness
2nd Generation Specific (1986-1992)
11
Sep 11, 2015 11:33 AM
mulcryant
2nd Generation Specific (1986-1992)
10
Sep 9, 2015 05:24 PM