rough idle then stall on a cold start
09-16-11, 09:47 PM
#1
Junior Member
Thread Starter
Join Date: Aug 2011
Location: ohio
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
rough idle then stall on a cold start
i have a 1988 rx7 turbo II and when i let it sit on my slightly inclined driveway overnight and then the next morning go to start it it will start and then rev high then drop then rev high and then stall. what cuold be the problem?
09-17-11, 10:33 AM
#2
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
Make sure that the cold start cam and thermowax is working correctly. It is located on the rear of the throttle body and holds the throttle open during cold starts for that high 1500 RPM idle that then gradually drops down.
Adjust the TPS.
Adjust the TPS.
09-18-11, 12:54 PM
#5
There's a thread that is somewhat related to this in the "Frequently asked Question's for 2nd Gen" thread.
Here's the link: https://www.rx7club.com/showthread.p...hreadid=235007
Might help
Here's the link: https://www.rx7club.com/showthread.p...hreadid=235007
Might help
Thread
Thread Starter
Forum
Replies
Last Post
