I am trying to model my car after the 2006 touge monster. I have been studying the mods as best I can. I am having trouble on their website reading japanese. I was wondering if anyone can list the type of mods that were done to the touge monster car. I read it has around 360ps. Also how much would it cost to replicate the same type of mods out here?

 

im sorry but the re-amemiya rx7 (the light blue one) is not the togue monster. Look for the Fujita engineering rx7 (single turbo pushing 450hp) 100more than the re-amemiya rx7. the amemiya rx7 got wooped. and i got the link to the vid that ill show you when i get home!



i would replicate the Fujita rx7 with the suspension mods of the re-amemiya rx7

 

Im sorry but Re-amemiya rx7 is not the touge monster. Look up Fujita engineering rx7. Single turbo 450hp and corners just as good as the amemiya rx7. the only think i like about the amemiya rx7 is the suspension

 

The car has fully maxxed out OEM Hitachi Twins in it's old state.

The tune will be difficult to replicate with our california 91 gasoline, but it is doable.

Their new setup is a single turbo that makes around 450 horsepower.

 

Have fun drooling.

 

single turbo conversion and a standalone EMS...plus the usual reliability mods...

 

That car is probably worth at least $50k

But thats just a ballpark estimate.

 

It has stock twins, re amemiya coilovers, and 255/40/17 advan tires on enkeis. Thats what i know of on the inside, the bodywork is obvious

 

as i said its not the togue monster anymore. sorry

http://www.youtube.com/watch?v=tQyEIRUyEvQ

theres even a video were it got it couldnt keep up with the fujita rx7
http://www.youtube.com/watch?v=2P03ovQMnZ8

 

Sick!!!!

 

I plan on going with the twin turbo setup. Are they using the 99 spec twin turbos? Also for that much horsepower are they still on stock injectors?

 

I plan on going wth the twin turbo setup. Does anyone know if they are using the 99 spec twins? Also for that much horsepower would they be using stock injectors still? Here are some pictures of my car currently. I plan to post more pics as the project comes together.

 

Would anyone know if the car is running 99 spec twin turbos? Upgraded injectors?

 

Sorry for the repeat posts. Still a newB, didn't know that my posts still needed approval...

 

some prefer more power and some prefer better handling.
i think the feed would win against the re 7 but it still depends on the course.
one with longer or more straightaways, the feed would win but on a course with many turns and few straightaways it might be close.
i would like to see them compete though!
that'd be great.


btw fine2nr your car is very nice.
that blue gives the car very smooth look to it.
also if you type in the url of RE's site in google it will translate it.
not very good translations but it makes going around the site easier.
yahoo does it too and i think their's is a little better.

 

Hey, I'm on the East coast, and working on a set up that's very similar. Hopefully I'll be able to keep it on the street 90% of the time. For me it's not just about going fast in a straight line. Real driving is all about the corners.

Here's a brief list of performance parts that I'm going to try and sneak past my wife this year. :-)~
Tell me what you think guys. I'm looking to join the 500HP club. Any help or advice is always appreciated.

RotorSports Racing 13B TT Stage II rebuild $3699 ( Agressively Street Ported )
Trust Greddy Sus. Turbo Exhaust Manifold $ 1105
RotorSports Racing RX7 Fuel System Upgrade Kit $995
Turbosmart 45mm Pro waste gate $589
Turbosmart Dual Port BOV $329
FEED Compression Tube Throttle Elbow $355
RE-Amemiya Level Man Intercooler Kit $3250 ( i might upgrade this to the Level Man GT )
RE-Amemiya FD Pulley Kit $528
RE-Amemiya Sports Catalyzer $1137
Stillway Oil Cooler Set $1070
Apexi AVC-R Boost Controller $499.99
Greddy Full Auto Turbo Timer w/ harness $120
Blitz Nur Spec R Exhaust
Trust TD07-25G Turbocharger
Exedy Hyper Twin Plate Clutch/ Flywheel Set $1560
A’PEXi PowerFC and Commander kit $980
Jacob’s rotary FC1000 $179
Currently searching for some RE-Amemiya spec Quantum coilovers
Cusco OS Front strut bar
Cusco OS Rear strut bar
Cusco OS-T Rear triangle addition
Cusco 1.5 way LSD
Cusco Oil Catch Tank
Ultra Earth Grounding kit
Bride Gias Carbon Kevlar seat x 2
HKS Chrono Guages ie. Boost, Fuel pressure, Intake temp. ect.

I am also planning on taking most of the creature comforts out of my FD, like carpet and replacing it with diamond plate aluminum for the floor, or going for a single wiper setup. You know you have to sacrifice some weight somewhere.

 

Thanks for the comments! Yeah I tried the translations. I am hoping if there is anyone that has very detailed specs of the 2006 touge monster it would be awesome! I believe this car raised the bar in Japan.

 

There both nice but i still prefer RE's it just drives alot smoother from what i can tell in the videos

 

hey Fine2NR thats a nice ride, im looking to do something similar to my fd when i get it....

 

is this car used in japan or here in the states?

 

I checked out your links on the touge battle which the re amemiya car was the camera car. Im curious if you got the battle that defeated the re amemiya car. and there is different tunning in fujita single turbo to4s vs re amemia 's stock 99 twin turbo. the fujita's fd tires cant keep up with its hp and amemias tires is excellent

 

Exactly, He doesn't even realize that third cars in those touge battles are camera cars. They haven't raced each other and I think the battle will be close.

 

Nice but this is the drift car wish is different.

 

we need lot of money to make this!!