Racing Beat exhaust fit 1986 N/A RX-7?
#1
Junior Member
Thread Starter
Join Date: Mar 2011
Location: Calgary
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
Racing Beat exhaust fit 1986 N/A RX-7?
Hello,
I was wondering if anyone could tell me if this Racing Beat exhaust Mazda RX-7 Racing Beat Exhaust!! - Edmonton Other Parts, Accessories For Sale - Kijiji Edmonton Canada. would fit in my N/A 1986 RX-7? The seller claimed that it would fit my car but I would like to make sure before I make a trip to Edmonton. I was also suggested by RX-7 Specialties to get a Racing Beat exhaust and they did say something about the turbo model...... I would greatly appreciate everyone's help as I cannot afford a complete brand new Racing Beat exhaust system and this would be a great alternative if it is compatible. Thanks!!
I was wondering if anyone could tell me if this Racing Beat exhaust Mazda RX-7 Racing Beat Exhaust!! - Edmonton Other Parts, Accessories For Sale - Kijiji Edmonton Canada. would fit in my N/A 1986 RX-7? The seller claimed that it would fit my car but I would like to make sure before I make a trip to Edmonton. I was also suggested by RX-7 Specialties to get a Racing Beat exhaust and they did say something about the turbo model...... I would greatly appreciate everyone's help as I cannot afford a complete brand new Racing Beat exhaust system and this would be a great alternative if it is compatible. Thanks!!
#2
Top Down, Boost Up
iTrader: (7)
As a whole, no. If you remove the TII downpipe and replace it with a header or RB's NA downpipe, it can work. But that may be the full 3" REV-TII system, which would be an issue when trying to bolt up 2.5" NA parts. The standard RB TII exhaust system is 2.5" to the y-pipe.
Last edited by RotaryRocket88; 08-16-12 at 12:11 AM.
#3
Retired Moderator, RIP
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
Personally I would go for it,seeing the guy is asking Best offer.You can always modify the exhaust to fit.
It's not really a common thing to get RacingBeat in Canada unless you buy the system and have it shipped,or Pay through the nose at the Cdn Dealer(sort of a USD plus kind of thing).
I put a 2.5 inch header to a 3 inch exhaust.The flanges of RacingBeat give you some lee-way to do that,since they are roughly the same size outside.
You can always sell the extra part(maybe the presilencer) on forum,www.bcrotary.com or that Scamslist..I mean Craigslist.
It's not really a common thing to get RacingBeat in Canada unless you buy the system and have it shipped,or Pay through the nose at the Cdn Dealer(sort of a USD plus kind of thing).
I put a 2.5 inch header to a 3 inch exhaust.The flanges of RacingBeat give you some lee-way to do that,since they are roughly the same size outside.
You can always sell the extra part(maybe the presilencer) on forum,www.bcrotary.com or that Scamslist..I mean Craigslist.
Last edited by misterstyx69; 08-16-12 at 07:01 AM.
#4
Junior Member
Thread Starter
Join Date: Mar 2011
Location: Calgary
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
I just asked the seller and he said that only the downpipe is 3" so I guess I will have to buy a downpipe somewhere else. I was also wondering if I would have to get a different presilencer or would that one be able to open up the 5th/6th ports? Thank you all for your responses I really appreciate it!!
#5
Retired Moderator, RIP
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
I just asked the seller and he said that only the downpipe is 3" so I guess I will have to buy a downpipe somewhere else. I was also wondering if I would have to get a different presilencer or would that one be able to open up the 5th/6th ports? Thank you all for your responses I really appreciate it!!
The setup that you "should have" is a Racing Beat Header...maybe a cat.stock y pipe and cans.
NOW,the Setup that you "can have" is a Racing beat header,Turbo presilencer,Y pipe and 2 cans.
The Header should be S4 and have the tube to activate the 5/6 ports..BUT if you have a header that does not have it you can Tap it at the collector(where it has the 2 pipes going into the collector) and weld a tube there and it will give you back pressure to activate the ports.
NOTE:you may be able to get away with a RB header and 2.5 inch presilencer,Instead of the 3 inch one he has..
#6
Junior Member
Thread Starter
Join Date: Mar 2011
Location: Calgary
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
The downpipe that HE has attaches to a Turbo,which you do not have.
The setup that you "should have" is a Racing Beat Header...maybe a cat.stock y pipe and cans.
NOW,the Setup that you "can have" is a Racing beat header,Turbo presilencer,Y pipe and 2 cans.
The Header should be S4 and have the tube to activate the 5/6 ports..BUT if you have a header that does not have it you can Tap it at the collector(where it has the 2 pipes going into the collector) and weld a tube there and it will give you back pressure to activate the ports.
NOTE:you may be able to get away with a RB header and 2.5 inch presilencer,Instead of the 3 inch one he has..
The setup that you "should have" is a Racing Beat Header...maybe a cat.stock y pipe and cans.
NOW,the Setup that you "can have" is a Racing beat header,Turbo presilencer,Y pipe and 2 cans.
The Header should be S4 and have the tube to activate the 5/6 ports..BUT if you have a header that does not have it you can Tap it at the collector(where it has the 2 pipes going into the collector) and weld a tube there and it will give you back pressure to activate the ports.
NOTE:you may be able to get away with a RB header and 2.5 inch presilencer,Instead of the 3 inch one he has..
Thread
Thread Starter
Forum
Replies
Last Post
thecody59
1st Generation Specific (1979-1985)
40
08-23-15 06:41 PM