New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

question about engine heat

Old Mar 5, 2011 | 02:21 PM
  #1  
demonpoodle's Avatar
Thread Starter
Full Member
iTrader: (1)
 
Joined: Mar 2010
Posts: 97
Likes: 0
From: Poughkeepsie, NY
question about engine heat

I've had my FC a little over a year but i was wondering about my engine temp gauge. I have never seen it go past 1/8th and reading around, I have noticed a lot of people that have high temps average. so I'm wondering if maybe there is a bad connection or are these cars supposed to run that cool. its an NA 13b and the only mod (if you can call it that) is the intake.

how cool are they supposed to run stock?
Reply
Old Mar 6, 2011 | 10:13 AM
  #2  
Aaron Cake's Avatar
Engine, Not Motor
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Feb 2001
Posts: 29,798
Likes: 128
From: London, Ontario, Canada
You can't totally rely on the stock gauge. It should be around 1/4 on the gauge. 1/8 sounds a bit low but you would need to verify with another gauge because the stock gauge could be worn out.

But you can do the simple checks. Test the thermostat to make sure it isn't stuck open.
Reply
Old Mar 6, 2011 | 11:27 AM
  #3  
cab91089's Avatar
Brap Brap Brap
iTrader: (3)
 
Joined: Jan 2010
Posts: 981
Likes: 1
From: Pennsylvania
It depends on how long you are driving the car for too, if youre not driving it far then that could be the reason why it never goes past 1/8 or you could have a problem with the cooling system.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
befarrer
Microtech
3
Aug 22, 2015 05:52 PM
Professorpeanutrx7
New Member RX-7 Technical
5
Aug 15, 2015 01:38 PM
befarrer
2nd Generation Specific (1986-1992)
4
Aug 14, 2015 04:18 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 01:59 PM.