Problems with AEM Meth Injection
#1
Senior Member
Thread Starter
iTrader: (1)
Join Date: Mar 2012
Location: Los Angeles
Posts: 420
Likes: 0
Received 0 Likes
on
0 Posts
Problems with AEM Meth Injection
So, I'm sure some of you saw my original post about buying a FD with Meth Injection already on it. I seem to be having a problem with it though. At times the system, which is mounted on the divider makes a loud clicking sound them my idle will start to fluctuate. I checked the box and the error light is flashing, but it's flashing continuously, I can't get a count to see what the error is. After reading the AEM manual that I downloaded apparently the box is not supposed to be mounted in the engine bay because it's not water proof, but I doubt that's the issue since everything else is in the cabin. Is there a trick for reading the error light so I can determine what's wrong.
#2
Retired Moderator, RIP
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
There is an AI Section on the Forum.
Link: Auxiliary Injection - RX7Club.com
Have you checked your filter to see that you are getting proper flow to the nozzle?
Link: Auxiliary Injection - RX7Club.com
Have you checked your filter to see that you are getting proper flow to the nozzle?
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
msilvia
3rd Generation Specific (1993-2002)
15
09-11-15 12:13 PM