New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

Probem.. Im stumped

Thread Tools
 
Search this Thread
 
Old Apr 11, 2013 | 11:20 PM
  #1  
pkneeland's Avatar
Thread Starter
Junior Member
 
Joined: Feb 2013
Posts: 43
Likes: 0
Probem.. Im stumped

Hey guys, my name is Patrick. I bought my first rotary in February, 88 s4 Gxl. bought it with a cooling issue, swapped rad, no issue. Fixed. Now I don't know what to do. My car hits a wall anywhere between 2k-6k. It's really strange. It's intermittently occurring. It's like it's choking out or not getting enough fuel. The weird part is, is that it's only at full throttle. If I ease off the throttle, it's will sometimes accelerate, just slowly. I know my 5th and 6th ports aren't working, but maybe fuel regulator, injectors, maf? Idk. Stumped. Any help would be great! It's my daily( if she wants to work), so I can't keep taking things apart...
Reply
Old Apr 12, 2013 | 02:55 PM
  #2  
misterstyx69's Avatar
Retired Moderator, RIP
Tenured Member: 20 Years
iTrader: (142)
 
Joined: Sep 2005
Posts: 25,581
Likes: 136
From: Smiths Falls.(near Ottawa!.Mapquest IT!)
I'd try fixing the ports first..
Reply
Old Apr 12, 2013 | 03:31 PM
  #3  
pkneeland's Avatar
Thread Starter
Junior Member
 
Joined: Feb 2013
Posts: 43
Likes: 0
The thing is, the ports weren't working when I bought the car, and this problem just recently started.
Reply
Old Apr 14, 2013 | 02:03 PM
  #4  
pkneeland's Avatar
Thread Starter
Junior Member
 
Joined: Feb 2013
Posts: 43
Likes: 0
This prob is intermittently occurring. Any ideas??
Reply
Old Apr 14, 2013 | 03:19 PM
  #5  
gerald m's Avatar
Dragons' Breath
Tenured Member 05 Years
 
Joined: Sep 2010
Posts: 1,129
Likes: 2
From: Pump Handle, SK. Canada
fuel filter maybe
Reply
Old Apr 14, 2013 | 03:38 PM
  #6  
pkneeland's Avatar
Thread Starter
Junior Member
 
Joined: Feb 2013
Posts: 43
Likes: 0
Swapped that, and the fuel pump.
Reply
Old Apr 15, 2013 | 10:40 PM
  #7  
misterstyx69's Avatar
Retired Moderator, RIP
Tenured Member: 20 Years
iTrader: (142)
 
Joined: Sep 2005
Posts: 25,581
Likes: 136
From: Smiths Falls.(near Ottawa!.Mapquest IT!)
what is the cooling issue you speak of?Is it eating coolant?
Reply
Old Apr 15, 2013 | 10:50 PM
  #8  
pkneeland's Avatar
Thread Starter
Junior Member
 
Joined: Feb 2013
Posts: 43
Likes: 0
No issue anymore, it had one. When I swapped the radiator, it fixed it.
Reply
Old Apr 15, 2013 | 10:52 PM
  #9  
pkneeland's Avatar
Thread Starter
Junior Member
 
Joined: Feb 2013
Posts: 43
Likes: 0
I'm thinking the ecu ground under my uim will be culprit. Can't get into that right now, will prob have to wait. I'll fix the ports while I'm in there too.
Reply
Old Apr 15, 2013 | 11:04 PM
  #10  
misterstyx69's Avatar
Retired Moderator, RIP
Tenured Member: 20 Years
iTrader: (142)
 
Joined: Sep 2005
Posts: 25,581
Likes: 136
From: Smiths Falls.(near Ottawa!.Mapquest IT!)
don't forget the O rings in between the lower manifold and the keg when ordering parts.
Reply
Old Apr 16, 2013 | 07:50 PM
  #11  
pkneeland's Avatar
Thread Starter
Junior Member
 
Joined: Feb 2013
Posts: 43
Likes: 0
Got em
Reply
Old Apr 19, 2013 | 07:40 PM
  #12  
pkneeland's Avatar
Thread Starter
Junior Member
 
Joined: Feb 2013
Posts: 43
Likes: 0
The ground was corroded.. Stripped the wire, and reconnected it. Got the ports working. What else should I check tomorrow morning?
Reply
Old Apr 20, 2013 | 09:08 PM
  #13  
pkneeland's Avatar
Thread Starter
Junior Member
 
Joined: Feb 2013
Posts: 43
Likes: 0
Okay.. Got the throttle body off to look at, and the thermowax pipes were terrible.. Explaining my high idle. 1 pipe was rusted and clogged, the other clogged, corroded, and broken. Bad.. But I reconnected everything and cleaned the thermowax to what I could. It didn't want to start at first, but got it running, and drove it. It was doing good, and redlined it. Then I got it fully warmed up... There is a belt squeaking at anything over 5k... And the problem came back... Great. Back to square one.
Reply
Old Apr 22, 2013 | 08:58 AM
  #14  
Ox7's Avatar
Ox7
Full Member
Tenured Member 05 Years
iTrader: (4)
 
Joined: Apr 2013
Posts: 64
Likes: 0
From: Virginia
Did you get the injectors rebuilt or cleaned. Also make sure the pressure sensor is good. I had a similar issue withy tii but between 5&6k
Reply
Old Apr 25, 2013 | 08:23 PM
  #15  
pkneeland's Avatar
Thread Starter
Junior Member
 
Joined: Feb 2013
Posts: 43
Likes: 0
Well... Ended up wrecked and totaling the car.. So thanks guys, but no more fc for right now.. :/
Reply
Old Apr 26, 2013 | 10:15 AM
  #16  
Ox7's Avatar
Ox7
Full Member
Tenured Member 05 Years
iTrader: (4)
 
Joined: Apr 2013
Posts: 64
Likes: 0
From: Virginia
R.I.P. Poor FC
Reply
Old Apr 26, 2013 | 11:21 AM
  #17  
1950884's Avatar
Junior Member
Tenured Member 10 Years
 
Joined: Mar 2003
Posts: 10
Likes: 0
From: india
At least you are ok? R you going to stay in the rotary world?
Reply
Old Apr 26, 2013 | 11:26 AM
  #18  
pkneeland's Avatar
Thread Starter
Junior Member
 
Joined: Feb 2013
Posts: 43
Likes: 0
Yeah. And I'm torn. Dunno yet
Reply
Old Apr 27, 2013 | 10:41 AM
  #19  
pkneeland's Avatar
Thread Starter
Junior Member
 
Joined: Feb 2013
Posts: 43
Likes: 0
Actually.. Looking at some rx7s
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Donald Hampton
2nd Generation Specific (1986-1992)
5
Sep 17, 2015 03:13 PM
Donald Hampton
New Member RX-7 Technical
7
Sep 1, 2015 03:41 AM
TailHappy
3rd Generation Specific (1993-2002)
9
Feb 8, 2002 11:48 AM




All times are GMT -5. The time now is 06:54 PM.