New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

PLEASE HELP!! 93 rx7 issues...mech/tech info needed!??

Thread Tools
 
Search this Thread
 
Old 08-22-13, 05:16 PM
  #1  
Can Post Only in New Member Section
Thread Starter
 
Mark93fd's Avatar
 
Join Date: Aug 2013
Location: Murfreesboro
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
TN PLEASE HELP!! 93 rx7 issues...mech/tech info needed!??

Hello,

I just joined this forum however im very familar with it. For the past two weeks if been trouble shooting my 93 rx7 using every forum i can find to help me. None are exactly like the problem ive having so here it goes.

It died while drifting and hasnt started since.

HERES WHAT I KNOW

1993 rx7 r1 manual
Cranks all day


Mods:
walbro 255
Hydro ebrake
Vacuum delete kit ( previous owner did this crap)
Rebuild with apex 2mm seals
Alum radiator
V mount intercooler with fan on a switch.


symtoms:
No spark
No fuel prime
It cranks all day
Tach does not read anything...did before
No check engine codes or light



Tested:
My compression is 90-100 on all plugs.

I dont think its flooded because i cant get fuel pump to prime.no white mist ,when i try to crank it out of exhaust or plug hole.

I bypassed the clutch and security starter relay.

Coil packs are getting proper ground.

Im ive tested them while attempting to crank and they (all leading and trailling plug wires). do not produce a spark. the coils without wires still no spark created


They are not pulsing any volts when i try to crank.

Ive checked the harness under the front driver wheel and nothing is cut or rubbed.

Fuel pump works but wont prime when i turn key over..its getting power

I REPLACED the egi main relay...still no fire.

REPLACED BATTERY!

My last guess is the ecu. I have one on the way as i type....

It is producing volts. I took it apart and nothing looked burnt or broke solders.

HOWEVER it does a very very minor burn smell....like i can just barly smell a burn in certain spots. But its not obvious untill you take it 100% apart and really sniff lol.

I dought its my CAS sensor but...?

Im almost at a dead end. I didnt add any mods myself..i mistakenly bought it that way.

Ive read countless forums trying to dignose this...none have helped me out.


I hope i can get this baby running again.
Anybody experienced this before?? Help
Old 09-01-13, 07:11 PM
  #2  
Full Member
iTrader: (1)
 
jamesbully's Avatar
 
Join Date: May 2012
Location: carstairs
Posts: 107
Likes: 0
Received 0 Likes on 0 Posts
Have you taken your spark plugs out ? Maybe you need new ones I couldn't get my car to start at all and I took the spark plugs out and cleaned them up a bit and she started first time
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Leeroy_25
3rd Generation Specific (1993-2002)
4
08-17-15 12:53 PM



Quick Reply: PLEASE HELP!! 93 rx7 issues...mech/tech info needed!??



All times are GMT -5. The time now is 02:47 AM.