New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

oil pressure ? and temperature question?

Thread Tools
 
Search this Thread
 
Old Feb 14, 2011 | 05:56 AM
  #1  
Neobeatz's Avatar
Thread Starter
Junior Member
 
Joined: Nov 2010
Posts: 33
Likes: 0
From: tampa
oil pressure ? and temperature question?

has anyone ever notice when your car is cold and when its warm how fast the oil pressure should come up ?


and how far should the needle come up on the temp guage what is normal and what is not


and are the two related ?
Reply
Old Feb 14, 2011 | 09:16 AM
  #2  
Aaron Cake's Avatar
Engine, Not Motor
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Feb 2001
Posts: 29,798
Likes: 128
From: London, Ontario, Canada
Year and model?

Oil pressure should be instant as soon as the car is started. It will be higher when cold.

After it warms up, you should be seeing about 30 PSI at idle and above 50 PSI at 3000 RPM.

Temp gauge depends on the car.
Reply
Old Feb 14, 2011 | 10:17 AM
  #3  
Sgtblue's Avatar
Urban Combat Vet
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (16)
 
Joined: Oct 2003
Posts: 12,160
Likes: 983
From: Mid-west
Not sure if I understand your question completely. But the viscosity rating of your oil and ambient temps make a difference. Rotarys tend to have fuel dilution to some degree over time, so how long since the last oil change can also influence things. And at least on the FD there will be some difference if you've removed the thermopellet. On mine it was generally higher, especially at cold start up.
Reply
Old Feb 14, 2011 | 09:43 PM
  #4  
Neobeatz's Avatar
Thread Starter
Junior Member
 
Joined: Nov 2010
Posts: 33
Likes: 0
From: tampa
86 gxl and i have been having issues with my start up after driving the car for a while especially when i drive it hard so , what i do notice is how slow my pressure guage on my oil goes up when i have these issues compared to when i cold start it in the morning and the needle just goes up to 60 psi
Reply
Old Feb 14, 2011 | 11:33 PM
  #5  
ceramic seals's Avatar
Banned. I got OWNED!!!
 
Joined: Feb 2011
Posts: 16
Likes: 0
From: OZ
Yeah man the oil preasure should be atleast 50psi idle and when hot be around min 40psi preasure.

derpends how old ya engine oil is to,iff its new should be high 60psi.

Ya temp should be half way on old rx7 like s1 s2 s3.

And the new cars like yours should be 1/3 so just under half way,iff its in the red you might have other issues,dont drive ya car iff it goes into the red.

But iff your driveing ya car very hard then the temp is goona go up a fair bit.
Reply
Old Feb 15, 2011 | 09:25 AM
  #6  
Aaron Cake's Avatar
Engine, Not Motor
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Feb 2001
Posts: 29,798
Likes: 128
From: London, Ontario, Canada
Originally Posted by ceramic seals
Yeah man the oil preasure should be atleast 50psi idle and when hot be around min 40psi preasure.
Um, no, it shouldn't. Factory spec says that anything between 15 PSI and 30 PSI is acceptable at idle. Pressure will be higher when the engine is cold.


Ya temp should be half way on old rx7 like s1 s2 s3.
No. S4s run at about 1/4 on the gauge. Half way is hotter than normal.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
andyvideopro
General Rotary Tech Support
3
Aug 20, 2015 10:55 AM
stickmantijuana
20B Forum
8
Aug 18, 2015 02:46 PM




All times are GMT -5. The time now is 06:08 PM.