New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

not starting need help

Thread Tools
 
Search this Thread
 
Old 09-08-10, 11:37 PM
  #1  
Junior Member
Thread Starter
 
agentFC's Avatar
 
Join Date: Dec 2007
Location: Canberra
Posts: 32
Likes: 0
Received 0 Likes on 0 Posts
not starting need help

hey guys,
last time i drove my FC Series 5 was about 4 months ago then it was just parked. today, i tried starting and i had a hard time doing it. everytime i take the plugs out, they were really wet with petrol and got some oil on them. but eventually after taking out the plugs, then cleaning them, then put them back in for more than an hour, i finally got it starting. But after turning it off, it wouldn't start again. i think the plugs are having a hard time sparking because of the fuel and oil mixing. what do you guys think? thanks
Old 09-09-10, 11:11 PM
  #2  
NASA-MW ST4

iTrader: (7)
 
farberio's Avatar
 
Join Date: Dec 2004
Location: Norcal, Bay Area
Posts: 3,800
Likes: 0
Received 3 Likes on 3 Posts
Its flooding, it could be broken and leaking injectors or low compression.

To deflood a S5 just put your foot all the way to the floor and crank for about 10 seconds and then try to start normally. The foot to the floor tells the ECU to not inject any fuel.

Also, you should let the car fully warm up before you turn it off to help prevent against flooding.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
ZacMan
Build Threads
4
09-19-15 09:20 PM
sherff
Adaptronic Engine Mgmt - AUS
5
09-12-15 12:22 PM
whinin
New Member RX-7 Technical
10
09-05-15 11:52 PM



Quick Reply: not starting need help



All times are GMT -5. The time now is 04:12 PM.