no power
01-25-10, 07:11 PM
#1
Can Post Only in New Member Section
Thread Starter
Join Date: Jan 2010
Location: idaho
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
no power
i have a 1984 rx7 and i just replaced the air filter plugs wires and coils and a battery the car fired up then died now no lights come on and there just no power so i figured i blew a fuse but idk anything about rotaries so any help would be nice thanks.
01-26-10, 02:13 PM
#3
Can Post Only in New Member Section
Thread Starter
Join Date: Jan 2010
Location: idaho
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
yes i have checked all the connectionto the battery and the coils this is how it was befor i changed the coils then like i said it started up died out then there was nothing there again.
01-27-10, 01:29 PM
#4
Lives on the Forum
Check the fusible links on the driver's side strut tower. Probably the middle one that is burnt. These can be replaced by plug-in type fuses, and you can find info on making that change by searching in the 1st gen forum. Good luck... 
.
.
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
03-15-22 12:04 PM
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
