New Owner Questions
Thread Starter
Can Post Only in New Member Section
Joined: Mar 2010
Posts: 1
Likes: 0
From: Colorado
Hey There all!
I too am new to the RX-7 thing, and have learned quite a bit, but I was searching my engine compartment today(87 na), and found what looks like a dashpot(adjustable screw labeled L<>R) between the pass side strut tower, and the airbox. It appears to be driving something vacuum actuated, as the wires coming out go into an electrical something that also has a vac. line. Any ideas? I just read my glove box manual begining to end, and nothing, but I forgot my sevice manual at the shop. Any help would be greatly appreciated!
I too am new to the RX-7 thing, and have learned quite a bit, but I was searching my engine compartment today(87 na), and found what looks like a dashpot(adjustable screw labeled L<>R) between the pass side strut tower, and the airbox. It appears to be driving something vacuum actuated, as the wires coming out go into an electrical something that also has a vac. line. Any ideas? I just read my glove box manual begining to end, and nothing, but I forgot my sevice manual at the shop. Any help would be greatly appreciated!
Joined: Feb 2001
Posts: 29,798
Likes: 128
From: London, Ontario, Canada
Hey There all!
I too am new to the RX-7 thing, and have learned quite a bit, but I was searching my engine compartment today(87 na), and found what looks like a dashpot(adjustable screw labeled L<>R) between the pass side strut tower, and the airbox. It appears to be driving something vacuum actuated, as the wires coming out go into an electrical something that also has a vac. line. Any ideas? I just read my glove box manual begining to end, and nothing, but I forgot my sevice manual at the shop. Any help would be greatly appreciated!
I too am new to the RX-7 thing, and have learned quite a bit, but I was searching my engine compartment today(87 na), and found what looks like a dashpot(adjustable screw labeled L<>R) between the pass side strut tower, and the airbox. It appears to be driving something vacuum actuated, as the wires coming out go into an electrical something that also has a vac. line. Any ideas? I just read my glove box manual begining to end, and nothing, but I forgot my sevice manual at the shop. Any help would be greatly appreciated!
The sensor with the vacuum line is the boost sensor.
Please post under your own topic instead of hijacking another.
Moved post to its own thread.
Download copies of the training manual and FSM, and read up
. You'll have a much easier time working on the car if you do. This is a helpful page with downloads for each, and it has some info on some of the main systems: http://mazdarx7.iougs.com/.
Download copies of the training manual and FSM, and read up
. You'll have a much easier time working on the car if you do. This is a helpful page with downloads for each, and it has some info on some of the main systems: http://mazdarx7.iougs.com/.
Thread
Thread Starter
Forum
Replies
Last Post



