New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

new first gen 1979 rx 7

Thread Tools
 
Search this Thread
 
Old Sep 21, 2012 | 01:55 PM
  #1  
sbeers's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
 
Joined: Sep 2012
Posts: 403
Likes: 0
From: akron ohio
new first gen 1979 rx 7

Hi.I am Shane and I am from Akron Ohio.
Just bought a 1979 rx7 clean no rust with 90k miles on it and drove around 60 miles and parked it over night. It wont turn even after jumping it no start? I'm new to cars as this is my first one so far i think it might be the alternator starter or just the battery even though its new? Also I heard of carbon lock but if its carbon locked will it turn ?


Any help apreciated thanks ":]

Last edited by misterstyx69; Sep 23, 2012 at 10:08 PM.
Reply
Old Sep 26, 2012 | 07:55 PM
  #2  
High Speed Promotion's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Sep 2007
Posts: 104
Likes: 0
From: Detroit, MI
Carbon lock refers to a problem with the apex seal s. The engine will still turn over with carbon lock. since the car was recently running its probablly not carbon lock. maybe a starter problem. Check battery to see if it puts out 12 volts. No 12 volts battery is discharged or bad. I have a 79 RX7, this was the only year Mazda used an external voltage regulator. Did you get it wet? its mounted on the inside panel drivers side under the hood facing the fender. Check the ground negitve cable coming from battery. Check battery and starter connection.
Reply
Old Sep 26, 2012 | 08:15 PM
  #3  
wthdidusay82's Avatar
Rotary Power
Tenured Member 15 Years
iTrader: (15)
 
Joined: Sep 2004
Posts: 3,706
Likes: 4
From: Dinwiddie, Va
If it's a 5 speed you could try rolling it and popping the clutch to start it. I've had a bad starter on my old 88 rx7, hit it with a hammer a few times (not too hard) and it started working again.

Good luck
Reply
Old Sep 26, 2012 | 09:59 PM
  #4  
sbeers's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
 
Joined: Sep 2012
Posts: 403
Likes: 0
From: akron ohio
Well found out the bstery was trash but now I put in a new. One and a altanator so running good. Do u guys kno how to fix a soeed ometer mine is off bad
Reply
Old Sep 28, 2012 | 08:55 PM
  #5  
Rotor_Venom08's Avatar
Don't Cross The Streams..
Tenured Member 10 Years
iTrader: (3)
 
Joined: Apr 2009
Posts: 842
Likes: 0
From: Houston, TX
TX

Originally Posted by sbeers
Well found out the bstery was trash but now I put in a new. One and a altanator so running good. Do u guys kno how to fix a soeed ometer mine is off bad
off? like not accurate or not working? its just a cable i believe that hooks into the transmission sometimes they can be loose or broken.
Reply
Old Sep 29, 2012 | 04:11 PM
  #6  
sbeers's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
 
Joined: Sep 2012
Posts: 403
Likes: 0
From: akron ohio
like off it says I'm going 120 constaly
Reply
Old Sep 29, 2012 | 11:52 PM
  #7  
wthdidusay82's Avatar
Rotary Power
Tenured Member 15 Years
iTrader: (15)
 
Joined: Sep 2004
Posts: 3,706
Likes: 4
From: Dinwiddie, Va
Could just be loose probably behind the gauges.

rotary > pistons
Reply
Old Sep 30, 2012 | 01:22 PM
  #8  
sbeers's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
 
Joined: Sep 2012
Posts: 403
Likes: 0
From: akron ohio
thanks I'm check it out
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Coochas
1st Generation Specific (1979-1985)
44
Nov 5, 2019 11:08 PM
demetlaw
3rd Generation Specific (1993-2002)
6
Oct 2, 2015 06:22 PM




All times are GMT -5. The time now is 12:03 PM.