New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

need some help.

Thread Tools
 
Search this Thread
 
Old 11-27-09, 06:15 PM
  #1  
Junior Member
Thread Starter
 
HKcrew's Avatar
 
Join Date: Nov 2008
Location: San Antonio, Tx
Posts: 15
Likes: 0
Received 0 Likes on 0 Posts
need some help.

my search wont work so i just thought id just ask.
I have a 88 rx7 n/a. I changed my oil the other day and when i went to start it, it would just keep cranking and wouldn't catch at all. i figured it was flooded so i pulled out the plugs and the fuse to the fuel pump and cranked a bunch. After i put everything back together and tried again. After cranking awhile it started up (smoked like cheech and chong) but within a few seconds died. I gave push starting it a shot, took me a couple try's but then it started again for just a few seconds and died. I'm getting good spark fuel and air. Any help would be great. Sorry again if this had been brought up a lot just i couldn't find anything clicking threw pages.

Chris
Old 11-28-09, 12:55 AM
  #2  
Top Down, Boost Up

iTrader: (7)
 
RotaryRocket88's Avatar
 
Join Date: Mar 2008
Location: San Diego, CA
Posts: 8,718
Likes: 0
Received 6 Likes on 4 Posts
Double check the areas you worked in. Changing the oil shouldn't have any effect on the car starting, so something has to be unplugged. I have no idea why you'd be near it, but an unplugged AFM can cause the car to start then die immediately.
Old 11-28-09, 11:51 AM
  #3  
Junior Member
Thread Starter
 
HKcrew's Avatar
 
Join Date: Nov 2008
Location: San Antonio, Tx
Posts: 15
Likes: 0
Received 0 Likes on 0 Posts
The AFM is plugged in and working. I will go double check everything but now im dealing with a dead battery . From what i have read it might be the CAS?
If so can anyone link me to where they talk about it?

Chris
Old 11-29-09, 04:23 PM
  #4  
Junior Member
Thread Starter
 
HKcrew's Avatar
 
Join Date: Nov 2008
Location: San Antonio, Tx
Posts: 15
Likes: 0
Received 0 Likes on 0 Posts
Double checked everything and still nothing .. I'm about to get a compression gage and test that. Also about to try to put some oil in the spark plug holes. Is there a recommended oil i should use?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Smokeyfb33
Old School and Other Rotary
10
10-01-15 12:10 PM
pfsantos
2nd Generation Specific (1986-1992)
1
09-30-15 01:29 PM
baix2
Power FC Forum
1
09-28-15 09:40 AM



Quick Reply: need some help.



All times are GMT -5. The time now is 10:15 PM.