ecr7

Ok its been a while since I've been on here but I just got another 7 finally and need help. Ok it's a 90 model n/a and it had sat for a few years. I started by dropping the tank and cleaning it (had some gel in the bottom). But brand new fuel pump and filters . Also sea foam and ATF were put and the motor turned over, But still want start I looked up how to just make sure you have compression by pulling plugs and listing and it sounds good. I get spark but I don't seem to get fuel. One more thing is the valve on top of the tank (I guess it is a return line of some sort) broke so I don't have it hooked up could that be it or possibly clogged injector?

So what's your thoughts could it be the valve on top of the tank or what?

One Dank Wank

Just a shot in the Dark a quick way to check if your getting fuel to the block is to crank the motor without the plugs in. In a normal situation you will see the fuel shoot out the plug holes...and if your flooding the motor this is a good way to clear out all that excess gas homie..