New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

need help with 1987 rx7 turbo II

Thread Tools
 
Search this Thread
 
Old Oct 18, 2011 | 12:47 AM
  #1  
1987turbo..II's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2011
Posts: 34
Likes: 0
From: iowa
IA need help with 1987 rx7 turbo II

randomly i went out to start my car and the seat belt light went on right away and then shortly after the buzzer started going off and stayed on even after i buckled up and it will randomly shut off when im driving and then turn back on but the light always stays on gets really annoying
Reply
Old Oct 18, 2011 | 09:34 AM
  #2  
Aaron Cake's Avatar
Engine, Not Motor
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Feb 2001
Posts: 29,798
Likes: 128
From: London, Ontario, Canada
Test and replace the driver side seat belt switch if necessary.

The buzzer is unrelated though. Check oil and coolant levels.
Reply
Old Oct 18, 2011 | 08:05 PM
  #3  
1987turbo..II's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2011
Posts: 34
Likes: 0
From: iowa
it did start right after i changed the coolant
Reply
Old Oct 18, 2011 | 09:17 PM
  #4  
1987turbo..II's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2011
Posts: 34
Likes: 0
From: iowa
IA

does that mean i need to put more coolant in and if so why is it so hard to fill up i have to keep waiting for it to go down takes forever
Reply
Old Oct 31, 2011 | 09:59 AM
  #5  
1993fd3sracer1's Avatar
Full Member
Tenured Member 05 Years
iTrader: (1)
 
Joined: Mar 2011
Posts: 76
Likes: 0
From: council bluffs
lol ******* noob ryan
Reply
Old Oct 31, 2011 | 10:46 AM
  #6  
Aaron Cake's Avatar
Engine, Not Motor
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Feb 2001
Posts: 29,798
Likes: 128
From: London, Ontario, Canada
It takes a while to properly fill and bleed the system. If you have a bleed screw on the left side of the rad where the upper hose connects, open it while you are filling.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
cam_7779
2nd Generation Specific (1986-1992)
9
Aug 18, 2015 07:48 AM
pzr2
General Rotary Tech Support
1
Aug 15, 2015 08:29 PM
JBatista1994
Introduce yourself
2
Aug 14, 2015 11:23 AM
KAL797
Test Area 51
0
Aug 11, 2015 03:47 PM




All times are GMT -5. The time now is 06:46 AM.