need help with 12 a
Thread Starter
Can Post Only in New Member Section
Joined: Jan 2010
Posts: 4
Likes: 0
From: victoria
need help with 12 a
just had the auto elec round and reckons my loom is in bad shape. its an rx2 72 mdl. does anyone know of new looms for this model or how much a rewire is? he is saying over 2000 dollars. Or does anyone have one for sale? alot of wires are stripped away and some are missing. any help would be appreciated thanks melbourne victoria.
Joined: Feb 2001
Posts: 29,798
Likes: 128
From: London, Ontario, Canada
Your best bet may be to find someone parting a similar car and get their harness, if it is in acceptable shape.
Another option would be a universal harness such as the ones made by Painless Wiring. The electrical system in the early RXs is very simple, so a universal harness with the appropriate number of circuits should go in without too much trouble (though you will have to make additions for trailing ignition, etc.).
Another option would be a universal harness such as the ones made by Painless Wiring. The electrical system in the early RXs is very simple, so a universal harness with the appropriate number of circuits should go in without too much trouble (though you will have to make additions for trailing ignition, etc.).
Lives on the Forum
Joined: Jun 2004
Posts: 11,359
Likes: 14
From: Grand Rapids Michigan
You can check with these guys, they are much more focused on the older rotaries and can probably help you out: http://www.vintagerotaries.org/index.php?act=idx
Good luck!
.
Good luck!
.
