New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

motor knock

Thread Tools
 
Search this Thread
 
Old 08-11-13, 03:23 PM
  #1  
Junior Member
Thread Starter
 
cmink13's Avatar
 
Join Date: Jul 2013
Location: Snellville, Ga
Posts: 22
Likes: 0
Received 0 Likes on 0 Posts
motor knock

I know this is crazy but at idle my rx7 knocks and while driving it stops. Do I need a rebuild or is there a sensor causing an issue? I don't know much about these motors to know what's going on.
Old 08-12-13, 01:23 PM
  #2  
Moderator

iTrader: (3)
 
diabolical1's Avatar
 
Join Date: Feb 2002
Location: FL
Posts: 10,822
Received 307 Likes on 268 Posts
welcome to the board.

1. which Rx-7?
2. have you had issues with oil pressure?
3. please describe the "knock" you're referring to.

it's been my experience that more often than not, people that say rotaries are "knocking" are usually hearing other things. that's not to say you can't hose main and/or rotor bearings though.
Old 08-12-13, 06:18 PM
  #3  
Junior Member
Thread Starter
 
cmink13's Avatar
 
Join Date: Jul 2013
Location: Snellville, Ga
Posts: 22
Likes: 0
Received 0 Likes on 0 Posts
Its a 91 s5 vert.

I dont know about oil pressure the gauge doesn't work.

The knock sounds like I threw a big rock inside the motor. But its not a constant knock its intermittent but sounds like a rattle but not an exhaust rattle.
Old 08-13-13, 10:48 PM
  #4  
Automotive Masochist
 
Trigger Happy's Avatar
 
Join Date: Aug 2013
Location: Tillsonburg
Posts: 23
Likes: 0
Received 0 Likes on 0 Posts
Can you take a video of the noise?
Old 08-14-13, 11:31 AM
  #5  
Junior Member
Thread Starter
 
cmink13's Avatar
 
Join Date: Jul 2013
Location: Snellville, Ga
Posts: 22
Likes: 0
Received 0 Likes on 0 Posts
Sure ill take a video today!
Old 08-14-13, 12:33 PM
  #6  
Martin S.

iTrader: (2)
 
evo_koa's Avatar
 
Join Date: Jan 2012
Location: Huntsville, Al
Posts: 1,402
Received 79 Likes on 57 Posts
the knock may be due to the oil pressure gauge not working and low oil pressure in the motor causing failure on the stationary gears. thats what happend to my 3rd gen
Old 08-14-13, 07:18 PM
  #7  
Junior Member
Thread Starter
 
cmink13's Avatar
 
Join Date: Jul 2013
Location: Snellville, Ga
Posts: 22
Likes: 0
Received 0 Likes on 0 Posts
Well I can't get it to do it anymore I found a hose hanging down that is supposed to go to the cat so I took the clamp off and took the pipe out and put a bolt in the hose and clamped it and all my noises seem to have stopped. But if it happens again ill for sure take a video
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
03-15-22 12:04 PM
msilvia
3rd Generation Specific (1993-2002)
15
09-11-15 12:13 PM
doritoloco
New Member RX-7 Technical
7
09-05-15 12:41 PM
83revival
New Member RX-7 Technical
4
09-03-15 10:42 PM



Quick Reply: motor knock



All times are GMT -5. The time now is 08:26 PM.