Mazda rx7 interior
Thread Starter
Junior Member
Joined: Aug 2021
Posts: 7
Likes: 0
From: washington
Mazda rx7 interior
I just bought an 86 rx7 fc and I want to replace the interior with a black interior does anyone know places that sell interior panels
Last edited by diabolical1; Aug 7, 2021 at 01:35 AM. Reason: solicitation included
Thread Starter
Junior Member
Joined: Aug 2021
Posts: 7
Likes: 0
From: washington
ok thank you do you know if I can look at different years of the fc and put newer door panels in I don’t know if the interior changed that much but it would be nice to know so I’m not just looking at 86
you're definitely not just looking at '86. 
i think all of those trim pieces interchange between S4 and S5 coupes, so i don't think you have any limitations except for the convertible - and even then, i'm not sure some parts wouldn't still fit.
i think all of those trim pieces interchange between S4 and S5 coupes, so i don't think you have any limitations except for the convertible - and even then, i'm not sure some parts wouldn't still fit.
Thread Starter
Junior Member
Joined: Aug 2021
Posts: 7
Likes: 0
From: washington
Ok sweet thank you for your help 😁
S4: 86-88
S5: 89-91
Be aware that there are some differences between S4 and S5 when you mix and match. For example, the lower B-pillar plastic trims on the S5 stick out a bit more to cover the auto seat belt mechanisms. This results in the S5 storage bin frame being about 2" smaller in the same area, so it fits together correctly. Since I did a rear seat to storage bin with black S5 parts, including the B-pillar trims, to allow for a battery relocation, everything matched up the way it should. Black S4 stuff would have been ideal, but those are quite rare (10th Anniversary Edition and Japanese Infini II-IV)
S5: 89-91
Be aware that there are some differences between S4 and S5 when you mix and match. For example, the lower B-pillar plastic trims on the S5 stick out a bit more to cover the auto seat belt mechanisms. This results in the S5 storage bin frame being about 2" smaller in the same area, so it fits together correctly. Since I did a rear seat to storage bin with black S5 parts, including the B-pillar trims, to allow for a battery relocation, everything matched up the way it should. Black S4 stuff would have been ideal, but those are quite rare (10th Anniversary Edition and Japanese Infini II-IV)
Thread Starter
Junior Member
Joined: Aug 2021
Posts: 7
Likes: 0
From: washington
S4: 86-88
S5: 89-91
Be aware that there are some differences between S4 and S5 when you mix and match. For example, the lower B-pillar plastic trims on the S5 stick out a bit more to cover the auto seat belt mechanisms. This results in the S5 storage bin frame being about 2" smaller in the same area, so it fits together correctly. Since I did a rear seat to storage bin with black S5 parts, including the B-pillar trims, to allow for a battery relocation, everything matched up the way it should. Black S4 stuff would have been ideal, but those are quite rare (10th Anniversary Edition and Japanese Infini II-IV)
S5: 89-91
Be aware that there are some differences between S4 and S5 when you mix and match. For example, the lower B-pillar plastic trims on the S5 stick out a bit more to cover the auto seat belt mechanisms. This results in the S5 storage bin frame being about 2" smaller in the same area, so it fits together correctly. Since I did a rear seat to storage bin with black S5 parts, including the B-pillar trims, to allow for a battery relocation, everything matched up the way it should. Black S4 stuff would have been ideal, but those are quite rare (10th Anniversary Edition and Japanese Infini II-IV)
Thread
Thread Starter
Forum
Replies
Last Post