main relay question
#1
Junior Member
Thread Starter
Join Date: Mar 2012
Location: nyc
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
main relay question
so i bought an fc from a guy who took it apart and never got arounf to putting it back together... dont ask i bought it the car is an 86 zero rust bought and engine tranny etc, now the main relay got wet and i replaced as it was full of water i get no spark with the new one but when i opened it and pulse the relays it sparks what do i do about this also can someone explain "jumping" it please
#2
Moderator
iTrader: (1)
What do you mean that you "pulsed the relays and it sparks. The relay coils are supplied voltage and ground by the two wire plug. The B/W wire should have voltage w/key to on. The Black wire is the ground. If either wire is problematic it could cause your problem.
The other plug has four wires. Bridging B/G to B/Y and White/Blue to B/W it will bypass the relay, but over time I suppose this would drain the battery.
The other plug has four wires. Bridging B/G to B/Y and White/Blue to B/W it will bypass the relay, but over time I suppose this would drain the battery.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
Nosferatu
2nd Generation Specific (1986-1992)
7
09-05-15 02:13 PM