New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

Knock Sensor blown? or...?

Old Dec 9, 2011 | 10:00 AM
  #1  
Driven233's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
iTrader: (1)
 
Joined: Sep 2011
Posts: 53
Likes: 1
From: Auburn Hills MI
Knock Sensor blown? or...?

So I get done with finals yesterday and wanted to celebrate by a nice relaxing day of car work, starting with an oil change, but this was waiting for me...



Car had been sitting for ~ 3 days(the odd tracks were probably caused by my creeper), did some searching both on the forums and the car and basically narrowed it down to two culprits: knock sensor or oil filler tube. I think I may have eliminated the oil filler tube because it is practically clean and it seemed as if the leak was coming from just above the front upper spark plug, snapped a photo (apologize for photo, took awhile to get just the right angle & its still not good...)



Can anyone confirm this is what a blown knock sensor looks like? Goo has dripped onto the spark plug cover directly below and its basically made a trail down to the pan

Also, is there enough goo in the knock sensor to cause all that, or do i have another leak? I'm hoping the knock sensor dying caused the goop to pick up grime along the way, hence the mess, but idk...
Reply
Old Dec 9, 2011 | 09:02 PM
  #2  
dgeesaman's Avatar
Moderator
Tenured Member: 20 Years
Liked
Loved
iTrader: (8)
 
Joined: May 2002
Posts: 12,313
Likes: 27
From: Hershey PA
Yeah that's the goo from a popped knock sensor. A new one is very expensive so I replaced mine with a used part.

David
Reply
Old Dec 10, 2011 | 05:46 PM
  #3  
Driven233's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
iTrader: (1)
 
Joined: Sep 2011
Posts: 53
Likes: 1
From: Auburn Hills MI
Thanks for confirmation!

I'm guessing its still ok to drive assuming I don't run it hard or past 4k rpm?

Is there an aftermarket or other oem knock sensor that will fit thats cheaper? or is used the only way? cause I just looked it up on mazdatrix and yeah.... pricey.

Last edited by Driven233; Dec 10, 2011 at 05:48 PM.
Reply
Old Dec 10, 2011 | 06:37 PM
  #4  
dgeesaman's Avatar
Moderator
Tenured Member: 20 Years
Liked
Loved
iTrader: (8)
 
Joined: May 2002
Posts: 12,313
Likes: 27
From: Hershey PA
I'd buy a used one.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
Mar 15, 2022 12:04 PM
eddierotary
Engine Management Forum
16
Oct 4, 2016 08:22 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 07:20 PM.