Just Bought 86' RX7
#1
Junior Member
Thread Starter
Join Date: Feb 2009
Location: San Antonio Texas
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Just Bought 86' RX7
came with no motor. any ideas how i can get car running as quick as possible for as cheap as possible? not saying that i want it done like crap but i just want to start driving it asap. thanx! let me know.
Will me disconnecting the amps from the speakers give me any electrical problems? i installed a new deck in my car and had to disconnect the amps to the speakers in order for them to work.
Will me disconnecting the amps from the speakers give me any electrical problems? i installed a new deck in my car and had to disconnect the amps to the speakers in order for them to work.
#2
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
Find an engine from an '86-'88 NA RX-7. Drops right in.
Disconnecting the amps is no big deal. If you are concerned about sound quality, run your own wire to the speakers. The factory stuff is twisted up in the main harness and is of narrow gauge.
Disconnecting the amps is no big deal. If you are concerned about sound quality, run your own wire to the speakers. The factory stuff is twisted up in the main harness and is of narrow gauge.
#4
Junior Member
Thread Starter
Join Date: Feb 2009
Location: San Antonio Texas
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
well i live with 3 roomates which have roomates rx7's as well so we have 2 turbo rx7s and 2 rx7's with no engines...but we have 2 N/A motors inside and im about to go threw both of them with one roomate to see what parts we need...if you know a place to get new parts for cheap please im very interested to hear.
Thanks
Thanks
#5
i got my own 86 swap to do have one clean body and bad motor
if u can find a street ported what a difference
if u can find a street ported what a difference
Last edited by Aaron Cake; 02-07-09 at 10:09 AM. Reason: Merge two posts
#6
Junior Member
Thread Starter
Join Date: Feb 2009
Location: San Antonio Texas
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
yea i have a CLEAN body but no engine...like i said i have a motor in the room and it is ported just looking for 2 rotors and some barings and a radiator to have it up and running...just ordered an Eshaft last night so hopefully like 2 weeks.
Thread
Thread Starter
Forum
Replies
Last Post
KAL797
Test Area 51
0
08-11-15 03:47 PM