New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

issues in tuning

Old Nov 2, 2016 | 12:44 PM
  #1  
Spirit R of the radio's Avatar
Thread Starter
Junior Member
iTrader: (1)
 
Joined: Nov 2016
Posts: 40
Likes: 0
From: Seattle
issues in tuning

Greetings,

Currently I have noticed that my boost seem to drop off and rise then finds a happy sitting point. I am not sure if the spike is something that could be tuned out or if this is more of a boost control issue. The vehicle runs an Apex-i ECU and electronic Boost controller.

Any help or guidance would be great, I am open to going with a different computer system or set up if someone can point me in the right direction. This setup came with the vehicle when I purchased it.

Thank you

-
G
Reply
Old Nov 3, 2016 | 01:15 AM
  #2  
armans's Avatar
Senior Member
Tenured Member: 10 Years
Liked
Loved
Community Favorite
iTrader: (2)
 
Joined: Oct 2014
Posts: 503
Likes: 39
From: America's finest city
still on twins or a single turbo setup?
Reply
Old Nov 3, 2016 | 10:06 AM
  #3  
Spirit R of the radio's Avatar
Thread Starter
Junior Member
iTrader: (1)
 
Joined: Nov 2016
Posts: 40
Likes: 0
From: Seattle
Originally Posted by armans
still on twins or a single turbo setup?
Greetings,

It is running Twins from BNR super car. They are rated and tuned at 15 PSI from what the previous owner told me, I also called BNR to verify the information and was given the parameters of there twin turbo set up, which matched the info.

Side Note:

I have had ABSOLUTELY no leads on a rotary tuner/ apex-i familiar shop in the PNW, so i realize i may need to do a bit of traveling to get this sorted.

Thanks again

-
G
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 08:58 PM.