installed new engine revs to 5k?
#1
Full Member
Thread Starter
Join Date: Oct 2011
Location: minnesota
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
installed new engine revs to 5k?
Just put in new engine and it immediately revs up to 5k now i idk if its the plates that sticking.. vaccum leak.. or the hard idle screw.. now i know i did install a new intake manifold gasket.. from mazdatrix did i miss something when i installed it? Btw i have a jspec s5 t2
#3
Full Member
Thread Starter
Join Date: Oct 2011
Location: minnesota
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
Thats basically the idle screw right? If it is i was gonna adjust it but the guys who helped me said its fine... and just a question when i got the gasket it was like blue and white.. is that the actually color or is that some sort of film protect?
#4
Full Member
Thread Starter
Join Date: Oct 2011
Location: minnesota
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
Well today looked for vac leaks and adjusted the harness or moved it because the throttle linkage was hitting it and switch a solenoid that was pretty sticky and moved some vac lines which i thought were in the right spot (boost sensor and abv valve on the intake) so now the car doesnt start....
Trending Topics
#8
rx7club's resident furry
iTrader: (1)
Join Date: Feb 2012
Location: Spokane, WA
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
when I had massive vacuum leaks in my shake-down testing the car would barely run or stall below 1500 RPM.
My guess is you bypassed the throttle body with a vacuum line or two. This would still meter the air through the MAF, but bypass the IAC (BAC)/throttle body
My guess is you bypassed the throttle body with a vacuum line or two. This would still meter the air through the MAF, but bypass the IAC (BAC)/throttle body
#9
Full Member
Thread Starter
Join Date: Oct 2011
Location: minnesota
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
Alright got it running!!! I actually missed the vac line right below the bac valve.... cant believe i missed that... idle surges but just needs a fine tune >:]and thnks thou guys!!
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM