ignition switch removale
#1
LOPEY IDLE
Thread Starter
ignition switch removale
ok Im trying to get my ignition switch off of my steering colume but there arnt any bolts or screws or anything it looks like I would have to chizle it apart or somthing. How do I get it off?
#4
Retired Moderator, RIP
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
those little round things are actually the heads of the screw.
If you get a chisel or a good screwdriver apply it to the head at an Angle so when you hit the screwdriver it is actually turning the Head of that screw backwards.
just take the blade of the Screwdriver and the head of the bolt on the RIGHT side,it will start moving counter-clockwise and you can turn them out,
Afterwards just put a regular threaded bolt in.
If you get a chisel or a good screwdriver apply it to the head at an Angle so when you hit the screwdriver it is actually turning the Head of that screw backwards.
just take the blade of the Screwdriver and the head of the bolt on the RIGHT side,it will start moving counter-clockwise and you can turn them out,
Afterwards just put a regular threaded bolt in.
Thread
Thread Starter
Forum
Replies
Last Post
ncds_fc
2nd Generation Specific (1986-1992)
19
09-15-15 12:03 AM