New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

Idle/throttle bogging questions

Thread Tools
 
Search this Thread
 
Old Aug 15, 2010 | 12:06 AM
  #1  
FCsavanna's Avatar
Thread Starter
wow, just wow
 
Joined: Sep 2009
Posts: 11
Likes: 0
From: Mid-Michigan
Question Idle/throttle bogging questions

Hello, I just put a used s4 na engine in my 87'. I seem to be having 2 problems, 1- when i start it it wants to idle around 1700 rpms. 2- when I open the throttle at any stage it bogs down and wants to stall. Any ideas why it might be doing these thing?
anyways, thanks in advance for your help!

-Ethan
Reply
Old Aug 15, 2010 | 10:21 AM
  #2  
Aaron Cake's Avatar
Engine, Not Motor
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Feb 2001
Posts: 29,798
Likes: 128
From: London, Ontario, Canada
When you start the car, it should fly to 3000 RPM for 17 seconds, then fall down to around 1500 RPM and slowly drop to 750RPM as the engine warms up.

The 3K startup isn't a big deal if not working. Does the engine speed slowly drop to 750RPM as the engine warms?

As for bogging, check for vacuum leaks, adjust the TPS and check you grounds.
Reply
Old Aug 16, 2010 | 12:51 PM
  #3  
FCsavanna's Avatar
Thread Starter
wow, just wow
 
Joined: Sep 2009
Posts: 11
Likes: 0
From: Mid-Michigan
After the 3k start up it will drop to 1500 rpm, then after it warms up it idles around 16-1700 rpm. I will check the vacuum leaks, check grounds and adjust the TPS later this evening.
Reply
Old Aug 17, 2010 | 12:10 PM
  #4  
FCsavanna's Avatar
Thread Starter
wow, just wow
 
Joined: Sep 2009
Posts: 11
Likes: 0
From: Mid-Michigan
A vacuum leak was the cause of the bogging. revs freely now. As for the idle, it idles steadily at 1500 rpm after the warm up cycle. Any suggestions on that?
Reply
Old Aug 17, 2010 | 03:08 PM
  #5  
FCsavanna's Avatar
Thread Starter
wow, just wow
 
Joined: Sep 2009
Posts: 11
Likes: 0
From: Mid-Michigan
Idle is normal now turns out i had the throttle cable too tight. Everything is good now.
Thanks for the help Aaron
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
_Tones_
Adaptronic Engine Mgmt - AUS
10
May 25, 2021 05:37 AM
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
heywier427
Naturally Aspirated Performance Forum
2
Sep 11, 2015 04:49 PM
Nosferatu
2nd Generation Specific (1986-1992)
7
Sep 5, 2015 02:13 PM




All times are GMT -5. The time now is 09:53 AM.