New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

Help!!!! Windows not working

Old Nov 9, 2010 | 09:55 PM
  #1  
mattydx's Avatar
Thread Starter
Junior Member
 
Joined: Sep 2010
Posts: 32
Likes: 0
Exclamation Help!!!! Windows not working

my electric windows on my 88 rnt working but the motors good wat can i do
Reply
Old Nov 10, 2010 | 11:44 AM
  #2  
RotaryRocket88's Avatar
Top Down, Boost Up
Tenured Member 10 Years
iTrader: (7)
 
Joined: Mar 2008
Posts: 8,718
Likes: 6
From: San Diego, CA
The contacts in your switches may just be dirty. Read this thread to learn how to take the switches apart and clean them up: https://www.rx7club.com/2nd-gen-archive-72/power-window-switch-write-up-766218/.
Reply
Old Nov 10, 2010 | 11:58 AM
  #3  
satch's Avatar
Moderator
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Jun 2005
Posts: 11,738
Likes: 16
From: tulsa,ok.
If the power window fuse is good then check to see if you have voltage on the Black/Red wire at the driver power window switch w/key to on. If voltage is present then it's either the Black ground wire to the switch or the contacts in the switch itself.
Reply
Old Nov 10, 2010 | 08:36 PM
  #4  
mattydx's Avatar
Thread Starter
Junior Member
 
Joined: Sep 2010
Posts: 32
Likes: 0
i check the contacts in the switches and cleaned them to be safe and i cant find the fuse the fuse box front pannel is missing do u kno which one it could be
Reply
Old Nov 10, 2010 | 08:39 PM
  #5  
mattydx's Avatar
Thread Starter
Junior Member
 
Joined: Sep 2010
Posts: 32
Likes: 0
also my sun roof isnt working i hear the motor so i took the interior out but i couldnt see if it was off the track nor could i find the track
Reply
Old Nov 10, 2010 | 09:23 PM
  #6  
satch's Avatar
Moderator
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Jun 2005
Posts: 11,738
Likes: 16
From: tulsa,ok.
Originally Posted by mattydx
i check the contacts in the switches and cleaned them to be safe and i cant find the fuse the fuse box front pannel is missing do u kno which one it could be
Says "power wind" and is 30 amps.
Reply
Old Nov 10, 2010 | 10:17 PM
  #7  
RotaryRocket88's Avatar
Top Down, Boost Up
Tenured Member 10 Years
iTrader: (7)
 
Joined: Mar 2008
Posts: 8,718
Likes: 6
From: San Diego, CA
Fuse box cover pictures are in the FAQ. Match up the fuses to it.
Reply
Old Nov 11, 2010 | 09:18 PM
  #8  
mattydx's Avatar
Thread Starter
Junior Member
 
Joined: Sep 2010
Posts: 32
Likes: 0
thnks wit was the fuses =]
Reply
Old Nov 11, 2010 | 09:19 PM
  #9  
mattydx's Avatar
Thread Starter
Junior Member
 
Joined: Sep 2010
Posts: 32
Likes: 0
ohh and does anyone no how to put the sun roof back on its track
Reply
Old Nov 12, 2010 | 09:01 AM
  #10  
datz's Avatar
GNARKILL
 
Joined: Nov 2009
Posts: 551
Likes: 0
From: phoenix, az
Originally Posted by mattydx
ohh and does anyone no how to put the sun roof back on its track
carefully

sorry i had to!
i have to get my sunroof back on track too, but i couldnt resist but laugh a little!
Reply
Old Nov 14, 2010 | 01:25 PM
  #11  
mattydx's Avatar
Thread Starter
Junior Member
 
Joined: Sep 2010
Posts: 32
Likes: 0
lol its all good i took the hole ceiling off and i thought i was takn a cover off but i ended up pullen the whole sun roof out lmao so i need to fig out how to get access to the track lol
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
sYnth.
Build Threads
0
Aug 19, 2015 06:27 PM
bURGRotary87
3rd Generation Specific (1993-2002)
2
Aug 19, 2015 03:54 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 07:28 PM.