Help with mods/upgrades on Rx7 fd
#1
Junior Member
Thread Starter
Join Date: Oct 2014
Location: Norway
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Help with mods/upgrades on Rx7 fd
Hei.
Im looking for some info on my singel turbo setup.
I have never started it, motor was blown when I got it.
Hoping for around 350-400hp.
first time building wankel( or any engine for that matter)
Mods:
Electromotive tec3.
Turbonetics turbo t66. Ar.82.
1260 and 1680 injectores.
FMIC.
Dual walbro 255 fuel pumps. An6 both ways.
Streetportet.
Dual oil coolers and bigger radiator.
Exedy stage 2 clutch and flywheel.
Have no wastegate right know was thinking about Tial 44.
what du you guys think about this??
Sorry about my english im from Norway
Im looking for some info on my singel turbo setup.
I have never started it, motor was blown when I got it.
Hoping for around 350-400hp.
first time building wankel( or any engine for that matter)
Mods:
Electromotive tec3.
Turbonetics turbo t66. Ar.82.
1260 and 1680 injectores.
FMIC.
Dual walbro 255 fuel pumps. An6 both ways.
Streetportet.
Dual oil coolers and bigger radiator.
Exedy stage 2 clutch and flywheel.
Have no wastegate right know was thinking about Tial 44.
what du you guys think about this??
Sorry about my english im from Norway
#2
Urban Combat Vet
iTrader: (16)
Hei.
Im looking for some info on my singel turbo setup.
I have never started it, motor was blown when I got it.
Hoping for around 350-400hp.
first time building wankel( or any engine for that matter)
Mods:
Electromotive tec3.
Turbonetics turbo t66. Ar.82.
1260 and 1680 injectores.
FMIC.
Dual walbro 255 fuel pumps. An6 both ways.
Streetportet.
Dual oil coolers and bigger radiator.
Exedy stage 2 clutch and flywheel.
Have no wastegate right know was thinking about Tial 44.
what du you guys think about this??
Sorry about my english im from Norway
Im looking for some info on my singel turbo setup.
I have never started it, motor was blown when I got it.
Hoping for around 350-400hp.
first time building wankel( or any engine for that matter)
Mods:
Electromotive tec3.
Turbonetics turbo t66. Ar.82.
1260 and 1680 injectores.
FMIC.
Dual walbro 255 fuel pumps. An6 both ways.
Streetportet.
Dual oil coolers and bigger radiator.
Exedy stage 2 clutch and flywheel.
Have no wastegate right know was thinking about Tial 44.
what du you guys think about this??
Sorry about my english im from Norway
Cooling is everything. So personally I'm not a fan of a FMIC. They reduce radiator efficiency, require a lot of plumbing, and usually compromise the front bumper. They're also exposed to damage from road debris. If you're willing to relocate the battery, there are large and efficient SMICs with good ducting available, or even better, a VMIC.
#3
Junior Member
Thread Starter
Join Date: Oct 2014
Location: Norway
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
With a proper safe tune your power goal should be reached. I'm not a tuner, so not sure on those fuel mods.
Cooling is everything. So personally I'm not a fan of a FMIC. They reduce radiator efficiency, require a lot of plumbing, and usually compromise the front bumper. They're also exposed to damage from road debris. If you're willing to relocate the battery, there are large and efficient SMICs with good ducting available, or even better, a VMIC.
Cooling is everything. So personally I'm not a fan of a FMIC. They reduce radiator efficiency, require a lot of plumbing, and usually compromise the front bumper. They're also exposed to damage from road debris. If you're willing to relocate the battery, there are large and efficient SMICs with good ducting available, or even better, a VMIC.
the battery is relocated to the backseat, so I have space for a VMIC but have to consider the mony aspect to
#4
Hey...Cut it out!
iTrader: (4)
Hei.
Im looking for some info on my singel turbo setup.
I have never started it, motor was blown when I got it.
Hoping for around 350-400hp.
first time building wankel( or any engine for that matter)
Mods:
Electromotive tec3.
Turbonetics turbo t66. Ar.82.
1260 and 1680 injectores.
FMIC.
Dual walbro 255 fuel pumps. An6 both ways.
Streetportet.
Dual oil coolers and bigger radiator.
Exedy stage 2 clutch and flywheel.
Have no wastegate right know was thinking about Tial 44.
what du you guys think about this??
Sorry about my english im from Norway
Im looking for some info on my singel turbo setup.
I have never started it, motor was blown when I got it.
Hoping for around 350-400hp.
first time building wankel( or any engine for that matter)
Mods:
Electromotive tec3.
Turbonetics turbo t66. Ar.82.
1260 and 1680 injectores.
FMIC.
Dual walbro 255 fuel pumps. An6 both ways.
Streetportet.
Dual oil coolers and bigger radiator.
Exedy stage 2 clutch and flywheel.
Have no wastegate right know was thinking about Tial 44.
what du you guys think about this??
Sorry about my english im from Norway
As far as the mods list is, I think you'll be above 400hp with that setup. I'm not too sure about the T66's capabilities as turbocharger terminology is a bit beyond my current understanding, but the rest looks good. The only weakness I can find is the fuel lines. If you are planning to use two Walbro 255's (they have 5/16" or 8mm barbs on them), I think it would be wise to upgrade to an 08AN feed line to not restrict flow. The return line can be stock or 06AN, whichever suits your build better.
To put it in perspective, the original fuel line are 8.0mm ID, for an area of approx. 50.27 square millimeters. 08AN lines are 12.7mm ID, for an area of 126.68 square millimeters. For the same length, the 08an has over double the volume of the stock lines.
#5
Junior Member
Thread Starter
Join Date: Oct 2014
Location: Norway
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
No worries about your English, it appears your grammar and manner of speech are better than most here in the states
As far as the mods list is, I think you'll be above 400hp with that setup. I'm not too sure about the T66's capabilities as turbocharger terminology is a bit beyond my current understanding, but the rest looks good. The only weakness I can find is the fuel lines. If you are planning to use two Walbro 255's (they have 5/16" or 8mm barbs on them), I think it would be wise to upgrade to an 08AN feed line to not restrict flow. The return line can be stock or 06AN, whichever suits your build better.
To put it in perspective, the original fuel line are 8.0mm ID, for an area of approx. 50.27 square millimeters. 08AN lines are 12.7mm ID, for an area of 126.68 square millimeters. For the same length, the 08an has over double the volume of the stock lines.
As far as the mods list is, I think you'll be above 400hp with that setup. I'm not too sure about the T66's capabilities as turbocharger terminology is a bit beyond my current understanding, but the rest looks good. The only weakness I can find is the fuel lines. If you are planning to use two Walbro 255's (they have 5/16" or 8mm barbs on them), I think it would be wise to upgrade to an 08AN feed line to not restrict flow. The return line can be stock or 06AN, whichever suits your build better.
To put it in perspective, the original fuel line are 8.0mm ID, for an area of approx. 50.27 square millimeters. 08AN lines are 12.7mm ID, for an area of 126.68 square millimeters. For the same length, the 08an has over double the volume of the stock lines.
Im a bit concerned about the exhoust .AR.
some say you need at least 96.ar to come up to around 400..
Thread
Thread Starter
Forum
Replies
Last Post