Having issues with my build!
Having issues with my build!
So I have a 1987 Mazda rx7, yes turbo I have a front mounted intercooler upgraded injectors battery is relocated to the back seat, mild to say the least I have a lot invested.
The start of my problem is I removed the hood for air flow at the autocross track, while the hood was off it rained let it set for two days before I started her again and it ran fine still no issues. I drove to the store and shut it off went to start it back up and I blew an inline 100 amp fuse I installed, now it has no power hesitates basically its like running on one rotor.
I have tried all the grounds new injectors an ecu maf fuel filter, coils plugs wires the motor only has 3500 miles since last rebuilt just about everything is new.
I am at a loss I have also tried thermo sensore please please anyone with info or ideas hit me up all the advice I can get would help. Richard..
The start of my problem is I removed the hood for air flow at the autocross track, while the hood was off it rained let it set for two days before I started her again and it ran fine still no issues. I drove to the store and shut it off went to start it back up and I blew an inline 100 amp fuse I installed, now it has no power hesitates basically its like running on one rotor.
I have tried all the grounds new injectors an ecu maf fuel filter, coils plugs wires the motor only has 3500 miles since last rebuilt just about everything is new.
I am at a loss I have also tried thermo sensore please please anyone with info or ideas hit me up all the advice I can get would help. Richard..
Thread
Thread Starter
Forum
Replies
Last Post
troym55
3rd Generation Specific (1993-2002)
23
May 25, 2016 12:42 PM
yetter227
2nd Generation Specific (1986-1992)
20
Sep 5, 2015 11:57 PM
rx8volks
Canadian Forum
0
Sep 1, 2015 11:02 PM



