GSL-SE lug pattern
#1
Junior Member
Thread Starter
Join Date: Mar 2019
Location: Ny
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
GSL-SE lug pattern
Hello all,
I have a 83 rx7 and want to conver over to the gsl-se lug patter. What’s the easiest way? Getting full suspension from a gsl-se? Or is there other options? Thank you for the help
I have a 83 rx7 and want to conver over to the gsl-se lug patter. What’s the easiest way? Getting full suspension from a gsl-se? Or is there other options? Thank you for the help
#4
Out In the Barn
iTrader: (9)
They are very rare nowadays.
If you had a 1984 or 1985 it would be much easier because then all you need are the rear axles/brakes/proportioning valve, etc. Then for the front just the brake components (rotors/calipers/etc). This is because the axle housings and front struts are the same. there are some small differences like the limited slip pumpkins etc but not enough to not make it work. The 1983 and below are what we call small axle and 1984/1985 are big axel.
If you had a 1984 or 1985 it would be much easier because then all you need are the rear axles/brakes/proportioning valve, etc. Then for the front just the brake components (rotors/calipers/etc). This is because the axle housings and front struts are the same. there are some small differences like the limited slip pumpkins etc but not enough to not make it work. The 1983 and below are what we call small axle and 1984/1985 are big axel.
#5
Junior Member
Thread Starter
Join Date: Mar 2019
Location: Ny
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
They are very rare nowadays.
If you had a 1984 or 1985 it would be much easier because then all you need are the rear axles/brakes/proportioning valve, etc. Then for the front just the brake components (rotors/calipers/etc). This is because the axle housings and front struts are the same. there are some small differences like the limited slip pumpkins etc but not enough to not make it work. The 1983 and below are what we call small axle and 1984/1985 are big axel.
If you had a 1984 or 1985 it would be much easier because then all you need are the rear axles/brakes/proportioning valve, etc. Then for the front just the brake components (rotors/calipers/etc). This is because the axle housings and front struts are the same. there are some small differences like the limited slip pumpkins etc but not enough to not make it work. The 1983 and below are what we call small axle and 1984/1985 are big axel.
Thread
Thread Starter
Forum
Replies
Last Post
pjr
Suspension/Wheels/Tires/Brakes
6
11-15-04 03:04 PM
luiml73
1st Generation Specific (1979-1985)
13
11-15-03 05:54 PM