Goodridge Brake Lines for S4 Turbo FC3S
#1
Junior Member
Thread Starter
Join Date: Feb 2012
Location: Fl
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Goodridge Brake Lines for S4 Turbo FC3S
I'm looking to order some new brake lines for my S4 Turbo FC, it's a 1987 original turbo.
Here's the link: 86-92 Mazda RX7 Brake Lines from Goodridge at Andy's Auto Sport
Which set do I need to order? The one for sport suspension or the one for rx7's with solid rear disc. Thanks!
Here's the link: 86-92 Mazda RX7 Brake Lines from Goodridge at Andy's Auto Sport
Which set do I need to order? The one for sport suspension or the one for rx7's with solid rear disc. Thanks!
#2
Retired Moderator, RIP
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
sport suspension.
4 piston calipers front.
vented rotors rear.
...The hard suspension is 4 lug.so solid rear
disc.
The TII's came with vented rotors,4 piston fronts like the Verts.(5 lug wheels)
Remember the lines are different on front from 4 lug to five lug.
Also that you will still use the small steel line that goes into the front 4 piston caliper
4 piston calipers front.
vented rotors rear.
...The hard suspension is 4 lug.so solid rear
disc.
The TII's came with vented rotors,4 piston fronts like the Verts.(5 lug wheels)
Remember the lines are different on front from 4 lug to five lug.
Also that you will still use the small steel line that goes into the front 4 piston caliper
Last edited by misterstyx69; 01-15-13 at 05:43 PM.
#3
tigers LOVE pepper!!!!!
iTrader: (52)
yeah,ive looked at those before and they made it real confusing,styx will correct me if im wrong but arent the "turbo" 4 piston front vent./rear vent. brakes exactly the same on all turbo/gxl/vert models? oh yeah styx your brackets are on the way and of course you know if your using aftermarket stereo youll prob. have to modify them,drill more mounting holes etc.i had to drill out some of those screws to seperate from radio,they were torqued!!!
#4
Full Member
Join Date: Jan 2013
Location: Gun Barrel City, Texas
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
I just installed a set of Edelbrock SS Brakelines EDE 685600 from Banzai, on my -87 Turbo ll. Works very well and easy to install, Just DON'T twist them during installation.
Thread
Thread Starter
Forum
Replies
Last Post
Frisky Arab
2nd Generation Specific (1986-1992)
13
08-18-15 05:30 PM