Gen 2 85 RX7?
#1
Junior Member
Thread Starter
Join Date: Nov 2008
Location: CT
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Gen 2 85 RX7?
Okay well here is what I've got.
Its a 1985 GSL-SE with a 13B engine. I've looked through every picture in the GEN1 forum and come to the conclusion its a Gen2, but the car was infact made in 1985. Its a four seater and resides in the USA. Anyone got any info on the car is it worth anything more?
One last thing, am I able to remove the engine without dropping the tranny? The bolts seem to be accessible from the engine bay.
Sorry for a non full shot, slipped my mind when pulling apart the engine.
Its a 1985 GSL-SE with a 13B engine. I've looked through every picture in the GEN1 forum and come to the conclusion its a Gen2, but the car was infact made in 1985. Its a four seater and resides in the USA. Anyone got any info on the car is it worth anything more?
One last thing, am I able to remove the engine without dropping the tranny? The bolts seem to be accessible from the engine bay.
Sorry for a non full shot, slipped my mind when pulling apart the engine.
#3
Junior Member
Thread Starter
Join Date: Nov 2008
Location: CT
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Kinda rare as in, I should leave the car stock.
Or kinda rare like a standard Camry.
On another note, the car was manufactured in 84 from the VIN, and purchased in Feb of 85.
Or kinda rare like a standard Camry.
On another note, the car was manufactured in 84 from the VIN, and purchased in Feb of 85.
#5
Junior Member
Thread Starter
Join Date: Nov 2008
Location: CT
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
JM1FB3316F0870242
F= 1985
OCT 1984 866965-871511
List of Monthly starting VIN (Chassis No.):
1983 1984 1985
JAN 815218 881177
FEB 819695 885029
MAR 824687 889474
APR 829422 893766
MAY 834333 899625
JUNE 839137/850001 905108
JULY 850015 909988
AUG 856209 912608
SEPT 800001 861829
OCT 800882 866965
NOV 806531 871511
DEC 811185 876904
Unless my source is incorrect. Ill try to get a full body shot of the car tonight, but notice the hood style, its not straight across like the Gen 1 cars.
F= 1985
OCT 1984 866965-871511
List of Monthly starting VIN (Chassis No.):
1983 1984 1985
JAN 815218 881177
FEB 819695 885029
MAR 824687 889474
APR 829422 893766
MAY 834333 899625
JUNE 839137/850001 905108
JULY 850015 909988
AUG 856209 912608
SEPT 800001 861829
OCT 800882 866965
NOV 806531 871511
DEC 811185 876904
Unless my source is incorrect. Ill try to get a full body shot of the car tonight, but notice the hood style, its not straight across like the Gen 1 cars.
#7
Rotary Enthusiast
iTrader: (14)
Join Date: Mar 2009
Location: the dalles
Posts: 1,161
Likes: 0
Received 0 Likes
on
0 Posts
from these pictures its an s4. meaning its a second gen manufactured between 86-88? i believe. BUT as for the VIN i always thought the ones have FB or SA in the beginning where that of a first gen. got me puzzled
Trending Topics
#9
clearly a FC, but if the manufactured date is after june 1985 then its a 86 model, i saw awhile back with a guy selling a 1985 on ebay but its kinda obvious when you look at the pics and see its a FC
#10
Junior Member
Thread Starter
Join Date: Nov 2008
Location: CT
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Okay SPECIAL MOMMENT.
The paper work that was combined with one of the many RX7s in our possession got mixed up.
We only have 1 Red rx7 but have two titles with different VINs. Long story short this is a 86 RX7
Progress Picture!
The paper work that was combined with one of the many RX7s in our possession got mixed up.
We only have 1 Red rx7 but have two titles with different VINs. Long story short this is a 86 RX7
Progress Picture!
#11
Ricer
iTrader: (4)
I was gonna mention to check the VIN that is stamped into the firewall. Much harder to change the factory stamped part rather than the little plate simply riveted onto the firewall or the one on the dash.
On the other hand, having mixed up titles is also a way of getting mixed up (obviously lol). Glad everything got worked out and looks like a good start to a fun project.
On the other hand, having mixed up titles is also a way of getting mixed up (obviously lol). Glad everything got worked out and looks like a good start to a fun project.
#14
Junior Member
Thread Starter
Join Date: Nov 2008
Location: CT
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Any tips on cleaning up parts? Specific cleaners things to no do or watch out for?
Anything external im trying to get the grim off any rust and spaying some engine temp paint onto of. But oil pan and timing belt im not exactly too used to cleaning..
So far.
Anything external im trying to get the grim off any rust and spaying some engine temp paint onto of. But oil pan and timing belt im not exactly too used to cleaning..
So far.
#16
Rotary Enthusiast
iTrader: (14)
Join Date: Mar 2009
Location: the dalles
Posts: 1,161
Likes: 0
Received 0 Likes
on
0 Posts
well i found out that if there are bearing near it dont use brake clean, idk why but when searchin how to overhaul the GSR tranny they told me not to use that cause of the bearings.
#17
dark side i sense in him
What you have is a concept. It had the 13B from a first gen. Produced in 85-85 when they were toying with changing the Body style. My friend Holly, who works for Jiom Downing in Atlanta, got to drive one to Deals Gap this year. The model she had was the 6th one made. They are rare. Keep it as stock as possible. I am PMing her now, as she know more about the particulars and can help you out more!
#19
Right near Malloy
iTrader: (28)
Join Date: Dec 1999
Location: Behind a workbench, repairing FC Electronics.
Posts: 7,841
Received 510 Likes
on
345 Posts
Note the fuel rail on the intake manifold, the Dynamic Chamber on the upper intake, and the CAS with direct fire coils.
It has secondary injectors.
-The GSL-SE's (1st gen with 13B) engine had only two injectors. Rated at 680cc/min, they were located on the center iron.
-The FC has two sets of injectors. One pair on the center iron rated at 500some odd cc/min and a pair in the intake that fires up at 4000+ RPM.
The Dynamic Chamber says "13B Injection" and has fins on it.
-The GSL-SE's Dynamic Chamber said "RE-EGI" for Rotary Engine - Electronic Gas Injection" and was smooth on the sides.
-The S4 FC has the "13B Injection" and fins.
It has a CAS with a dual output leading coil and selective direct fire trailing coils.
-The FC has a very sophisticated ignition system. I don't think you can find a better performing coil on any other engine aside from LSx engines.
-The GSL-SE has a distributor and standard oil filled coils on the fender.
Observe:
1st Gen 13B:
S4 FC N/A 13B:
What he has there is an S4 GXL. (Note the wiring going to the strut towers. Indicates it has Electronic Adjustable Suspension. I'll bet if he takes a pic of teh interior, there'll be a switch in front of the mirror controls in the center console for "Sport" and "Normal" modes of shock absorber stiffness. The GXL is the ONLY model to come with this feature. It should also come with the Clutch type LSD, Power everything, and many of them were 2+2. (Mine is)
If he's REALLY early like mine and like the example pic above, he has the coolant overflow bottle over by the leading coil pack and fuse block on the driver's side.
I think they moved it to the front on later years because people kept spilling coolant all over the electronics.
Last edited by Pele; 06-25-09 at 11:38 AM.
#21
Rotary Freak
What you have is a concept. It had the 13B from a first gen. Produced in 85-85 when they were toying with changing the Body style. My friend Holly, who works for Jiom Downing in Atlanta, got to drive one to Deals Gap this year. The model she had was the 6th one made. They are rare. Keep it as stock as possible. I am PMing her now, as she know more about the particulars and can help you out more!
Holly
#24
Junior Member
Thread Starter
Join Date: Nov 2008
Location: CT
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
How the hell do I get the eccentric shaft nut off? See picture look for the large socket. I got the flywheel off no big deal, is there some uber secrete to it? I see a plate in the haynes Manuel but i really don't want to buy more adapters