Full vacuum hose change
#1
Junior Member
Thread Starter
Join Date: Jul 2012
Location: Adelaide
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
Full vacuum hose change
Ok. I know there's a few threads on this. I've read them all. But non say what I need to remove to change them or what I will need to buy to replace them. Like gaskets if I have to take the inlet manifold off so I'm just wondering what I will need to buy and change and what parts will need to take off to swap over every vacuum hose on my rx7 13b turbo
#2
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
Buy a generic silicon vacuum hose kit. That should give you 99% of what you need to complete the job, hose wise.
As for gaskets, likely all you will need is an upper to lower intake gasket.
Don't forget a selection of vacuum caps because the originals are probably totally solid at this point.
As for gaskets, likely all you will need is an upper to lower intake gasket.
Don't forget a selection of vacuum caps because the originals are probably totally solid at this point.
Thread
Thread Starter
Forum
Replies
Last Post