Flywheel fc turbo2 - france
#1
Senior Member
Thread Starter
Join Date: Oct 2010
Location: Toulouse, FR
Posts: 256
Likes: 0
Received 0 Likes
on
0 Posts
Flywheel fc turbo2 - france
Hi, as my clutch was being changed, it appears that my flywheel is completely burned (didn't know it could happen). So i have to find one asap and as cheap as possible (as i will be running low on cash...). I ask mazda, they sell the flywheel for 680€... which is a lot... I thought i could go with lightened one as they are more around 200-250$ but then i'll need to change the counterweight...
Please help me
Please help me
#2
Top Down, Boost Up
iTrader: (7)
No chance of just having the flywheel turned?
You can use an aftermarket light flywheel, but you'll need to get a hold of a rear counterweight from an automatic. The counterweight must be from the same series as your engine.
You could also try the classifieds for a used TII flywheel. The shipping may be a little steep, but they're not worth much.
You can use an aftermarket light flywheel, but you'll need to get a hold of a rear counterweight from an automatic. The counterweight must be from the same series as your engine.
You could also try the classifieds for a used TII flywheel. The shipping may be a little steep, but they're not worth much.
#3
Senior Member
Thread Starter
Join Date: Oct 2010
Location: Toulouse, FR
Posts: 256
Likes: 0
Received 0 Likes
on
0 Posts
i finally went for an ACT streetlite (13.9lbs i believe) flywheel with the associated counterweight... bought it from ebay, hope i won't have any other bad surprises...
Thread
Thread Starter
Forum
Replies
Last Post
LongDuck
1st Generation Specific (1979-1985)
12
10-07-15 08:12 PM