FD Oil Problem
12-20-13, 02:13 AM
#1
Junior Member
Thread Starter
Join Date: Jul 2013
Location: New Mexico
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
FD Oil Problem
As of right now I own a FD with oil going into the turbo exhaust manifold. While going back to speed, 45-> 60 all of a sudden white smoke from the engine bay and out of the exhaust. It will turn over and everything but now the turbo is flooded with oil and also the wastegate. I'm in the process of getting the engine rebuilt (88k stock miles), but what else should I look at getting to make this not happen again.
12-31-13, 09:34 AM
#3
Junior Member
Thread Starter
Join Date: Jul 2013
Location: New Mexico
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
From taking the engine out and just looking at the work down a "Get it done any possible way" single turbo swap. The oil cooler didnt get upgraded, or even replaced. The Block off plates are poorly made in shop. Stock ECU, fuel components, and MAP sensor. I found out it was running 15lbs since 08 when he paid for the swap to be done at a shop that closed down.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM