New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

Fd issues

Thread Tools
 
Search this Thread
 
Old 07-09-13, 06:35 PM
  #1  
Junior Member

Thread Starter
iTrader: (2)
 
BlewByYou's Avatar
 
Join Date: Jul 2013
Location: Houston
Posts: 39
Likes: 0
Received 0 Likes on 0 Posts
TX Fd issues

Hey guys I'm experiencing some issues with my 93. One day it will act normal next it idles super high when I first start it then lowers try's to down shift itself then up shift water gauage will max out as well as oil pressure. Where should I start? Sounds like a ground maybe an the chassis. I also notice a lil water dripping by the ac when it's been run a lil. Any issues with the ac boxs?

Thanks.
Old 07-09-13, 08:37 PM
  #2  
Retired Moderator, RIP

iTrader: (142)
 
misterstyx69's Avatar
 
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes on 114 Posts
well I guess you should state that the car is AUTO?..and any other modifications that you have on it?
Condensate from the A/C is normal..you see small puddles under almost every vehicle that has AC.
Old 07-10-13, 07:01 AM
  #3  
Urban Combat Vet

iTrader: (16)
 
Sgtblue's Avatar
 
Join Date: Oct 2003
Location: Mid-west
Posts: 12,022
Received 866 Likes on 615 Posts
Go to the 3rd Gen. FAQ's and check out what AWS (accelerated warm-up system) is and how it works. See if that might be related to your issue.
Old 07-10-13, 11:52 AM
  #4  
Junior Member

Thread Starter
iTrader: (2)
 
BlewByYou's Avatar
 
Join Date: Jul 2013
Location: Houston
Posts: 39
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by misterstyx69
well I guess you should state that the car is AUTO?..and any other modifications that you have on it?
Condensate from the A/C is normal..you see small puddles under almost every vehicle that has AC.
Car is auto and its bone stock! Condensate from the A/C dripping into the cars carpet isnt normal :/
Old 07-10-13, 11:53 AM
  #5  
Junior Member

Thread Starter
iTrader: (2)
 
BlewByYou's Avatar
 
Join Date: Jul 2013
Location: Houston
Posts: 39
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Sgtblue
Go to the 3rd Gen. FAQ's and check out what AWS (accelerated warm-up system) is and how it works. See if that might be related to your issue.
I'll check it out, thanks bud.
Old 07-10-13, 11:54 AM
  #6  
Junior Member

Thread Starter
iTrader: (2)
 
BlewByYou's Avatar
 
Join Date: Jul 2013
Location: Houston
Posts: 39
Likes: 0
Received 0 Likes on 0 Posts
I was looking closer under the hood by the starter area looks like some loose wiring. Im put it on the lift and a check to see if the starter harness etc is touching something it shouldnt be. When the roads are bumpy is when it cuts out and starts acting up like something is lose an shutting the ecu off an on.. smh
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
03-15-22 12:04 PM
Shainiac
Single Turbo RX-7's
12
07-17-19 02:20 PM
Bauer778
3rd Generation Specific (1993-2002)
10
11-04-15 04:42 PM
betes
1st Generation Specific (1979-1985)
8
09-27-15 08:25 AM
Steven_McKinley
General Rotary Tech Support
12
09-05-15 10:48 AM



Quick Reply: Fd issues



All times are GMT -5. The time now is 01:07 AM.