FC subframe on a Series 1 RX7
04-28-12, 02:53 AM
#1
Junior Member
Thread Starter
Join Date: Nov 2011
Location: New Zealand
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
FC subframe on a Series 1 RX7
Hi all,
Great forum!
I was wondering if any of you could give me some info of the FC suframe swap on a SA22?
I have seen some good threads on here but cant seem to find some mesurements.
I mainly want to know how far to re drill the front holes back to situate the FC subframe so that it is centered in the wheel wells properly. I work in metric so mm is prefered but im not fussy.
If someone could help me out that would be great!
Thanks.
Great forum!
I was wondering if any of you could give me some info of the FC suframe swap on a SA22?
I have seen some good threads on here but cant seem to find some mesurements.
I mainly want to know how far to re drill the front holes back to situate the FC subframe so that it is centered in the wheel wells properly. I work in metric so mm is prefered but im not fussy.
If someone could help me out that would be great!
Thanks.
Thread
Thread Starter
Forum
Replies
Last Post
