Engine Mounts and Driveshaft
#1
Junior Member
Thread Starter
Join Date: Jun 2010
Location: Vallejo,Califronia
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Engine Mounts and Driveshaft
Anyone have like a ball park estimate for motor mounts and a drive shaft for a 5.0 mustang engine that would go into a first gen rx7.
I have a line for a first gen rx7 for about $200.
A 5.0 mustang engine from the 90 LX models for $400. (comes with tranny and ECU w/ harness)
What else would i need for it to work in a first gen?
I have a line for a first gen rx7 for about $200.
A 5.0 mustang engine from the 90 LX models for $400. (comes with tranny and ECU w/ harness)
What else would i need for it to work in a first gen?
#2
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
Unless Granny's Speed Shop sells such a thing, the price will depend on how much your fabricator charges to make them. If you can fabricate stuff, the mounts will cost the price of some metal from the local store. Then have a local driveline place make a shaft. Custom driveshafts are generally around $200-$300 in my experience.
That V8 makes what, 180HP?
That V8 makes what, 180HP?
Thread
Thread Starter
Forum
Replies
Last Post
KAL797
Test Area 51
0
08-11-15 03:47 PM