do i have to switch to 5 lug???
08-06-10, 08:35 PM
#1
YAY! Rebuild Time
Thread Starter
do i have to switch to 5 lug???
hi, my 87 rx-7's motor just crapped out and im thinking of doing the turbo 2 swap. i know i have to have the driveshaft and diff, but do i have to swap to 5 lug before driving it? thanks in advance.
08-07-10, 09:03 PM
#4
Retired Moderator, RIP
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
You can keep the hubs.
the setup will be the TII half shafts with 4 lug wheels,and Crappy brakes(fronts will be single piston Right?) but hey,at least you will have more power to Hit the Car HARDER!..J/k.
I am just trying to say that if you are putting a TII engine then you really should Upgrade the brakes too.when you can.it's only a reasonable upgrade.
the setup will be the TII half shafts with 4 lug wheels,and Crappy brakes(fronts will be single piston Right?) but hey,at least you will have more power to Hit the Car HARDER!..J/k.
I am just trying to say that if you are putting a TII engine then you really should Upgrade the brakes too.when you can.it's only a reasonable upgrade.