New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

Convertible Top

Thread Tools
 
Search this Thread
 
Old Mar 21, 2018 | 06:59 PM
  #1  
Drdhoro's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2018
Posts: 6
Likes: 0
From: 487 Hasquiat Place, North Saanich BC
Convertible Top

The power top on my RX7 convertible, 1988, stopped short of closing. On examination I found the left (driver side) electric motor will not respond. All fuses and limit switches appear to be okay. Local Mazda dealer quotes $2000.00 cdn for new replacement. I live near Victoria, BC. Can anyone advise of where I can have the motor diagnosed and possibly rebuilt? I have been unable to find a shop locally that can do this.
Attached Thumbnails Convertible Top-ef3cc421-4ee1-4ce4-9b60-150b6403b7b6.jpeg  
Reply
Old Mar 23, 2018 | 04:53 PM
  #2  
MACRacing's Avatar
Full Member
iTrader: (1)
 
Joined: Mar 2018
Posts: 119
Likes: 11
From: Illinois
Can you put power directly to the motor to see if it works at all?
Reply
Old Mar 23, 2018 | 06:02 PM
  #3  
Drdhoro's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2018
Posts: 6
Likes: 0
From: 487 Hasquiat Place, North Saanich BC
Have done this and it works. However, it appears that the limiting switch does not stop it. The right motor appears to stop in one direction (up or down not attached to the top at this point). I’m assuming the left motor should stop for the opposite direction but it doesn’t. Hence the issue must be a faulty limiting switch. I’m trying to locate an auto electric service to verify and repair. This task is beyond my skill set.
Reply
Old Mar 23, 2018 | 06:24 PM
  #4  
Natey's Avatar
Eats, Sleeps, Dreams Rotary
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (19)
 
Joined: Aug 2004
Posts: 4,496
Likes: 1,484
From: West Coast
Do you have the handbrake pulled all the way up until the BRAKE light is on on?

I think I remember something about the e-brake and top being connected.
Reply
Old Mar 23, 2018 | 07:03 PM
  #5  
Drdhoro's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2018
Posts: 6
Likes: 0
From: 487 Hasquiat Place, North Saanich BC
Originally Posted by Natey
Do you have the handbrake pulled all the way up until the BRAKE light is on on?

I think I remember something about the e-brake and top being connected.
You are right and yes the hand break has been fully set throughout our testing.
Reply




All times are GMT -5. The time now is 08:28 PM.