cold air intake...
#1
Full Member
Thread Starter
iTrader: (8)
Join Date: Jul 2009
Location: Corpus Christi
Posts: 188
Likes: 0
Received 0 Likes
on
0 Posts
cold air intake...
does anyone know where i can find a real good cold air intake system online for a 86 GXL n/a?
i keep finding replacement parts. driving me insane
i keep finding replacement parts. driving me insane
#3
In a Bucket
iTrader: (8)
On ebay you can buy a maf adaptor the bolts on the maf are M6 X 1.0 pitch it is a 3" cone filter that fits it.. By removing the stock air box there is a hose to the air pump... I've seen sent ups to put a small breather fliter on the air pump
I bought the maf adoptor and the cone filter for 20 bucks 65 cents for the bolts.. The maf kit comes with a plastic gasket for the maf..
I will say noticeable differance in an N/A
I bought the maf adoptor and the cone filter for 20 bucks 65 cents for the bolts.. The maf kit comes with a plastic gasket for the maf..
I will say noticeable differance in an N/A
#4
Too old for this
If you don't mind doing some cutting, you can get one of those MAF adapters and some 3" pipe and relocate the cone filter just above the brake cooling duct. You have to relocate the washer fluid reservoir and cut out just enough of the metal around where the washer fill tube went through to fit the 3" pipe. I also cut out the top of the brake cooling duct for more airflow, but the filter gets dirty really fast now.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
The1Sun
1st Generation Specific (1979-1985)
0
09-07-15 10:21 PM